Cars
Air conditioning is a luxury that most early truckers agree they can’t be without, especially when they reside in a hot part of the country. But those big, clunky compressors, huge receivers hanging below the dash, bulky hoses running all over the place and extra wires showing are some of the reasons why air conditioning has deterred hardcore rodders for years. Of course, Vintage Air has eliminated those concerns with an excellent add-on system that not only works well, but also coexists with your engine compartment and interior aesthetics.
Vintage Air has kits that are designed for specific applications as well as universal kits. Its kits provide all of the required mounting hardware, brackets, vents, hoses, fittings, ducting, electrical wiring and switches needed to get you through your project. If you have any problems, Vintage Air has a tech support line that is second to none. You have a choice of either the internet or telephone (weekdays only).
0Comments
Now, it may seem crazy that anyone would take sandpaper to a new paint job, but if you want to have a glass-like finish that is exactly what happens. Of course, it is special sandpaper, and the person doing the work needs to know exactly what he is doing or that paint job can be toast. One of the things that makes color sanding possible is that the paper used is meant to be wet while the job is taking place. The water not only works as a lubricant, but it also removes the fine paint sludge from the area. The problem is getting that water in the proper place and having enough of it to do the job. After all, who really likes sticking his arm into a cold bucket of water time after time?
0Comments
When Jorge Torres was young he would help his father around his shop. Named after the senior Torres, Armando’s Custom Upholstery in San Jacinto, California, opened in 1989 when Jorge was still in high school. In 1992, he began working full time with his father and brother, Armando Jr. He stared doing old cars and went to a few shows to promote their work. During this time he mentioned to his dad that he wanted to build a 1969 Chevy pickup. It turned out that his dad had a friend who owned one, but he was told that the truck was in pretty rough shape. All Jorge heard was that the price, at $1,500, was in his range.
0Comments
The longer we are in this business, the more we are certain that the one skill which is most important to know is how to paint. A custom painter can take nearly anything and turn it into a fine ride. Sure, those who can work on suspension or engines are able to take their specialty and turn it to their advantage, but no one modification makes more impact than a cool paint job. That is why guys such as Sam Spinelli, a custom painter for more than 12 years, can cruise around town in this 1990 Chevrolet C1500. Adorned with a killer basecoat and an amazing set of flames, it would be a show truck for the rest of us, but he simply describes the Chevy as his daily driver.
0Comments
When we selected a Chevrolet Corvette ZR1 twin-cam, small-block 350 V-8 engine for our Cimtex Rods Super Cameo, we knew that we would be breaking new ground in the sense that GM never built a “production” automatic-transmission-equipped Corvette ZR1. However, there is record that a couple of Corvette ZR1s were specially equipped with automatic electronic overdrive transmissions for physically challenged Corvette enthusiasts. We don’t know whether it was done by the factory or by the private sector.
Nonetheless, it was our intent to run an automatic transmission behind this awesome powerplant. After all, we wanted our ’56 Super Cameo to be as civilized as possible, yet still be able to handle all the available torque and horsepower that will be the result of this twin Powerdyne (BD11-A) supercharged and intercooled Corvette ZR1 engine. But what type of GM automatic transmission would we actually be using?
0Comments
The Power Programmer is designed so that once the parameters are established and loaded, the unit is pulled and the program remains in the onboard computer until you elect to remove it. The HyperPAC is different; this unit stays in place. In addition to the three stages of performance tuning—the HyperPAC has all of the performance programming benefits of the Power Programmer—it also has diagnostics; an engine monitor with a complete gauge display; a dynamometer, which includes such items such as a horsepower graph; and our favorite, a dragstrip program. This program actually monitors real-time engine operating conditions, has a Christmas tree start, displays a timeslip and will provide you with “magazine-type road test” acceleration times in 10-mile increments. It will record and display important engine operating conditions throughout the run and will display drive wheel horsepower versus vehicle speed after each run—in both table and graph formats.
0Comments
The ’07 Tahoe, Chevrolet’s premature baby, hit the street in late March 2006. Introducing the next generation of Tahoes so early was part of some master marketing scheme, born and nurtured in the hallowed halls of Chevrolet corporate. In any case, the ’07 Tahoe’s rear ride height measured 23-1/8 inches from the center of the hub to the lip of the fenderwell, while the front measured only 20-1/4 inches. As usual, the rear stood considerably higher than the front.
0Comments
Television has created an unusual interest in all things high-performance, both cars and trucks. On any night you can watch some creation of modified vehicles, and even though there’s not much reality to the builds, you can get a good idea of what’s going on. But don’t get your hopes up: Unlike the team of experts that supposedly does this in a week, your build will probably take six months or more, and longer at some shops. While you can witness a number of world-class cars rolling across the auction block, commanding huge prices from over-?enthusiastic bidders, you will find that this, too, is not the reality that most of us live in each day, as many auction samples are some of the more rare in existence. The one thing each of these shows has in common is that typically the owner rarely gets his hands dirty and if there is any owner involvement, it is often limited to writing a check.
This no doubt is a great way for some to enjoy the hobby, but it’s not the approach that most enthusiasts take, and that includes Rick Finzer. As a way of introduction, Finzer is the event coordinator for a much respected Florida car show and swap meet known as the Turkey Run. The legendary Turkey Run is celebrating its 33rd anniversary and is well known by most enthusiasts, and Finzer has been involved since its inception.
0Comments
Langston, a longtime rodder and home builder, has owned several awesome rides in the past, including a ’63 Vette convertible, a ’51 Chevy pickup and an ’84 Chevy street truck. The only problem with all of these cars is that they are two-seaters—one driver and one passenger. Alan and his wife, Amy, have three boys who absolutely love hanging with their dad at the rod shows. Since Alan and Amy needed room for Sam, Jacob and Trace to ride when going to and from the local rod runs, they decided to build a vehicle that would provide enough room for five, and plenty of room to load up and go on trips. Alan decided that since he’d previously owned a ’51 and loved it, the ride would be an Advanced Design Chevrolet.
0Comments
Before the advent of the “smoothie look,” people were slicking down the lines of their cars and trucks in numerous ways, and shaving door handles was one of the more popular mods. Today the trend is to fit later-model door handles rather than no door handles at all. This still provides a simple way to clean up your vehicle with very little effort, yet retains the convenience of manually opening the door. If you have the patience, talent and imagination, you can borrow the parts from a donor car or truck and fit them to your own project, thereby achieving a cool, smooth look that will be unique to your vehicle.
0Comments
