Hot Rods
Mark Turner is an avid hot rodder—he eats, sleeps and breathes hot rods and muscle cars, and he jumps at any opportunity to add another car to his collection. On one of Turner’s many trips to check on the progress of a Camaro he had being built at G&S Custom Fabrication & Suspension in Athens, Alabama, owner Greg Blaydes told him about a ’67 Camaro RS/SS convertible being built whose owner had lost interest and was looking to get out from under the car.
To say that the Fox-body Mustangs have been among the favorites of Ford performance enthusiasts since they began production in 1979 is like saying Henry Ford did okay. Even those without an eye for the obvious know that, by sheer numbers alone, these highly effective, as well as affordable, machines rule the streets of America. And while ’79-’93 Mustangs may lack some of the technological advancements found in Ford showrooms today, there’s an abundance of components available through the aftermarket that will make up for that shortcoming, and lots more.
All Ford guys know the proper formula for building a Fox-body car: take a Mustang and cram it full of injected V-8. That’s the mantra, the 11th commandment of the Mustang community. Fortunately, someone forgot to show that particular stone tablet to Bill Powell, owner of Powell Performance (714/992-4909). He did something very different when he built his Fox body: he built a Thunderbird, and he built it with a turbo-four.
If you’re like many of us, vacillating between the car you’ve always dreamed of owning and what you really can afford, be sure you know what you need before you shell out more money than sense. Check around, ask your friends, read magazines on the subject, surf the Internet, get connected, and you’re likely to find your dream car, even if it is not everything you think it is.
Experience the thrill of Project Tin Can, a neighborhood sensation turned adrenaline-pumping amusement ride! With its roaring 283 engine and close-ratio Muncie four-speed, this car is a showstopper. Hear the laughter, witness the stares, and feel the excitement as Tin Can leaves a trail of awe wherever it goes. Discover how a modest 283 engine transformed into a powerhouse, making this car a 13-second wonder. Join us as we bid farewell to Project Tin Can, but stay tuned for occasional updates and adventures. Thank you to all who contributed to this unforgettable journey. Old-school enthusiasts, rejoice!
If you’re in the planning stages of building your car, or even if you have finished and are driving it, there are lots of free or inexpensive things you can do to make your ride faster and/or more efficient. This month, The Auto Builder gives you 25 of those ideas. Most of these free tips simply involve putting your car on a diet. Every 100 pounds of weight removed from your car equals dropping 1/10th of a second at the strip. Even though you may not be racing, the same theory applies to the street, and also to the extra weight you must lug around.
Eyes wide open, with faces up against the glass, kids on a passing school bus wondered what it could be. Amazed by the size of this land yacht, some must have wondered what it was like to pilot such a gas-guzzler, while a few couldn’t help but smile at the resounding roar of the mighty L72 427 underneath it all.
Let’s face it, most of us are working within the confines of a set of unwritten, yet clearly defined, rules of hot rodding. Stance, engine choice and wheels are for the most part selected from a menu of items that come “pre-approved” by our peers. Sure these rules work most of the time, and they provide a degree of certain acceptance when you’re building a traditional pre-’49 hot rod. But all in all, it also makes us a group of conforming nonconformists. However, for some hot rodders (and they are in the minority) building hot rods is about pure ingenuity, a total lack of peer pressure and joy of mixing parts from various sources and making it all work.
Ryan Newman grew up with a steering wheel in his hands. From the age of five, he has been behind the wheel of a racecar. Now, almost 20 years later, Ryan drives for Penske Racing South on the NASCAR Nextel Cup Series. In 2003, Ryan won eight races, 11 poles and was named Speed Channel’s Driver of the Year. In 2004, he will be driving a Dodge sponsored by primary sponsor Alltel with associate sponsorship form Mobil 1 and Sony Electronics on 38 weekends.
Although there is no set list or solid criteria we look for when choosing a feature car, we typically know the instant we’ve found one. Sometimes it’s a flawless paint job and subtle body mods that draw us in; other times, it’s a fully built motor loping angrily. Other times, though, we come across a car that is just plain cool—not the fastest, or even highly modified, but the kind of car you just look at and say, “Wow, check out that…” So it was at Goodguys Charlotte this year: sitting proudly in the mist and drizzle was Doug Wayne’s ’66 Galaxie convertible. At Auto Builder, we have a soft spot for large vehicles, and, realistically, Ford is not known for making many great small cars. Even small Fords are big, and if you don’t believe us, stick an early Falcon next to a Scion. But few companies do big as well as Ford, and even from a distance, we knew this Galaxie was as cool as it is long.
