







To say Tom Long has an interest in cars is to say the Pope has an interest in religion. Long has always
To say Tom Long has an interest in cars is to say the Pope has an interest in religion. Long has always been a “car guy,” just like the rest of us. Having owned several specialty vehicles over the years,
Some folks talk about the great muscle car wars of the ‘60s and early ‘70s, but it’s hard to find a car
Some folks talk about the great muscle car wars of the ‘60s and early ‘70s, but it’s hard to find a car guy who experienced it, enjoyed it and still owns the same car. At 66 years of age, Mike Overly was
Bending irons have been used in the industry for many years. We first became aware of how handy they
Bending irons have been used in the industry for many years. We first became aware of how handy they are during a 10-year stint in the can industry.
Boughn started looking for a new truck, and when he saw a shiny red ʼ99 Chevy Sportside Extended Cab
Boughn started looking for a new truck, and when he saw a shiny red ʼ99 Chevy Sportside Extended Cab pickup at his local dealership, he knew it was the one. He purchased the truck and drove it home, but
Big billet wheels, custom suspensions and modern power plants—that’s what we’ve come to expect from a
Big billet wheels, custom suspensions and modern power plants—that’s what we’ve come to expect from a first generation Camaro. And while these items are great if that’s what you prefer, we just can’t help
If there was ever a time of automotive wonderment and absolute freedom among designers and enthusiasts
If there was ever a time of automotive wonderment and absolute freedom among designers and enthusiasts alike, it was the early 1950s. This was a special time when automobile manufacturers were exploring
Forty-four years have passed since Musselman teamed with Boyd Coddington in creating one of the most
Forty-four years have passed since Musselman teamed with Boyd Coddington in creating one of the most amazing rods of its day, an excetpional car that took its place in history as the Oakland Roadster Show's
THE AUTO BUILDER
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design
Featured

SODA BLASTING
When starting any project that requires bodywork, rebuilding or even repainting, the first question is always, “What could possibly be lurking under the old paint that could come back and haunt us later?”

AIR SUPPLY
Air conditioning is a luxury that most early truckers agree they can’t be without, especially when they reside in a hot part of the country. But those big, clunky compressors, huge receivers hanging below the dash, bulky hoses running all over the place and extra wires showing are some of the reasons why air conditioning has deterred hardcore rodders for years. Of course, Vintage Air has eliminated those concerns with an excellent add-on system that not only works well, but also coexists with your engine compartment and interior aesthetics.
Vintage Air has kits that are designed for specific applications as well as universal kits. Its kits provide all of the required mounting hardware, brackets, vents, hoses, fittings, ducting, electrical wiring and switches needed to get you through your project. If you have any problems, Vintage Air has a tech support line that is second to none. You have a choice of either the internet or telephone (weekdays only).

A FAMILY AFFAIR
In the summer of 1977, a young couple expecting a son decided to purchase a new family vehicle, one that would provide ample room, safety and the ability to handle their love of camping and the outdoors. After deciding on a Chevrolet, the couple headed out and purchased a new ’78 two-wheel-drive Blazer from a dealer in Knoxville, Tennessee. Optioned out nicely for the time, the Blazer was equipped with A/C, a 400-inch small block, an automatic transmission, power disc brakes and a factory tach-equipped instrument cluster.
After driving the Blazer for several years, the couple decided to present it to their son, Travis Griffin, as a 16th birthday present. He drove the Blazer to and from high school, and then was given the opportunity to have the Blazer painted for graduation.

The 2026 Ridler Roundup
For more than 70 years, Detroit Autorama has been the proving ground where the world’s most ambitious custom cars, hot rods, and coachbuilt masterpieces step into the spotlight. What started back in 1953 as a humble fundraiser to build a drag strip has grown into a full-blown celebration of automotive

HAMMERHEAD
Of all the cars that have found favor among super rodders and racers alike, few would argue the appeal of ’39-’41 Willys coupes and pickups, which have enjoyed a powerful attraction since first appearing as gas coupe and sedan drag racers back in the ’60s.

The Crusher
You can’t fault a man for knowing what he likes, and in the case of Chelsea, Alabama’s Mike George, what he likes is the ’69 Camaro. at the age of 41 years old, he’s managed to own no fewer than 15 of these cars over the years, but none was

BARRY BULL SESSION
There are so many good-looking ’32 Ford street rods around, one might think that building a really nice one is easy, but it is not that simple. To begin with, the Deuce is an inherently good-looking car, which presents a two-edged sword. First, you have a great-looking piece to start

STORM WATCH
It seems as if only yesterday that the 2003 Ridler award was presented at the Detroit Autorama. Each year’s event is progressively a tougher call to make, because the cars continue to get better and better, and more expensive in their construction and detail. Some of the most beautiful vehicles

THE 2004 GREAT EIGHT
It was once said, “To aspire to perfection is the goal of all who create, as anything less confines us to conformity,” and never has this been more apparent than in the numerous rodding creations being shaped today. Never before has so much time, effort and expense been lavished on

River Rod Royalty
Inside the 2026 Grand National Roadster Show, the thunder didn’t stop at the hot rods. Tucked among the country’s finest customs and street machines was a killer lineup of vintage ski hydros, circle boats, and heirloom river runners that brought serious waterborne attitude to the show floor. Blown big-blocks, hand-laid

GNRS 2026 Truck Showcase
Hot rodders used to scoff at the idea of trucks stealing the show. Not anymore. The 2026 Grand National Roadster Show (GNRS) proved that custom trucks aren’t just workhorses—they’re rolling showcases of power, design, and pure cool. From slammed classics to full-throttle modern bruisers, trucks dominated the floor, making it

Detroit Riddles
Why is it we build top-end hot rods? We all have many different reasons, but the underlying one will always be to get a little attention. Even though it may not be your sole intent, there is a part of you that wants people to tell you “nice car” or,

Curves, Chrome, and Legacy: Fat Attack 2026
The Fat Attack exhibit at GNRS 2026 rolled in with curves, chrome, and attitude, and at the heart of it all was the undeniable legacy of Pete & Jake’s Hot Rod Parts. Pete Chapouris and Jim Jacobs didn’t just make parts — they made a movement, showing the world that
THE AUTO BUILDER
Featured

RODS ON THE RIVER
A look back at the 2006 Strawberry Festival in Dayton, Tennessee, where The Auto Builder hosted the first Rods on the River car show, drawing crowds, classic cars, and community spirit.

STOP, DROP, AND ROLL
From the rugged workhorses of the ’70s to today’s luxurious pickups, discover the transformation and retrofitting process of a ’68 Chevy truck. Follow the journey as No Limit Engineering’s dropped spindle/disc brake conversion kit enhances both braking performance and aesthetics, bringing a touch of modern luxury to a timeless classic. Dive into the details of this four-hour installation and witness the stunning results that elevate the truck’s functionality and appearance. Experience the perfect blend of nostalgia and innovation in this truck restoration project.

Back In Black
Jerry McMullan is a long-time Chevy fan, and when he wanted to find a cool daily driver, he knew two things. The first was that the vehicle would be a Chevy, and the second was that he knew it had to be black. Having been the proud owner of a couple of previous ’67-’72 Chevys (a ’70 Chevelle SS and a ’70 El Camino SS), he knew that that the style suited him, so he thought that a pickup from those years would be just right for what he had in mind. After a little searching, he came across this ’71 Chevy Cheyenne. McMullan says that the truck was in fair condition when he purchased it (for the now-reasonable, though still hard to believe, price of $11,000), and thus began his three-year odyssey of building his perfect pickup.
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design

The 2026 Ridler Roundup
For more than 70 years, Detroit Autorama has been the proving ground where the world’s most ambitious custom cars, hot rods, and coachbuilt masterpieces step into the spotlight. What started back in 1953 as a humble fundraiser to build a drag strip has grown into a full-blown celebration of automotive

HAMMERHEAD
Of all the cars that have found favor among super rodders and racers alike, few would argue the appeal of ’39-’41 Willys coupes and pickups, which have enjoyed a powerful attraction since first appearing as gas coupe and sedan drag racers back in the ’60s.

The Crusher
You can’t fault a man for knowing what he likes, and in the case of Chelsea, Alabama’s Mike George, what he likes is the ’69 Camaro. at the age of 41 years old, he’s managed to own no fewer than 15 of these cars over the years, but none was

BARRY BULL SESSION
There are so many good-looking ’32 Ford street rods around, one might think that building a really nice one is easy, but it is not that simple. To begin with, the Deuce is an inherently good-looking car, which presents a two-edged sword. First, you have a great-looking piece to start

STORM WATCH
It seems as if only yesterday that the 2003 Ridler award was presented at the Detroit Autorama. Each year’s event is progressively a tougher call to make, because the cars continue to get better and better, and more expensive in their construction and detail. Some of the most beautiful vehicles

THE 2004 GREAT EIGHT
It was once said, “To aspire to perfection is the goal of all who create, as anything less confines us to conformity,” and never has this been more apparent than in the numerous rodding creations being shaped today. Never before has so much time, effort and expense been lavished on

River Rod Royalty
Inside the 2026 Grand National Roadster Show, the thunder didn’t stop at the hot rods. Tucked among the country’s finest customs and street machines was a killer lineup of vintage ski hydros, circle boats, and heirloom river runners that brought serious waterborne attitude to the show floor. Blown big-blocks, hand-laid

GNRS 2026 Truck Showcase
Hot rodders used to scoff at the idea of trucks stealing the show. Not anymore. The 2026 Grand National Roadster Show (GNRS) proved that custom trucks aren’t just workhorses—they’re rolling showcases of power, design, and pure cool. From slammed classics to full-throttle modern bruisers, trucks dominated the floor, making it

Detroit Riddles
Why is it we build top-end hot rods? We all have many different reasons, but the underlying one will always be to get a little attention. Even though it may not be your sole intent, there is a part of you that wants people to tell you “nice car” or,

Curves, Chrome, and Legacy: Fat Attack 2026
The Fat Attack exhibit at GNRS 2026 rolled in with curves, chrome, and attitude, and at the heart of it all was the undeniable legacy of Pete & Jake’s Hot Rod Parts. Pete Chapouris and Jim Jacobs didn’t just make parts — they made a movement, showing the world that
THE AUTO BUILDER
Featured

Nova Suspension

The Independent Way

How to Choose a Camshaft

TILT-A-WHEEL
Tilt steering, cruise control, heated seats and A/C are all amenities that we have grown accustomed to without ever knowing it. We’ve come to expect our seat to power forward and our steering column to drop at the flick of a lever; after all, it’s a matter of driver comfort. As these driver comforts have become a part of our daily drivers, it’s not unthinkable that we would want the same for our classic trucks. Our resident ’68 Chevy makes the rounds to and from lunch, along with the occasional cruise-in, so why not build in many of the same conveniences? After looking online, we decided that our outdated straight column just had to go, and then we’d work on the rest of those comfort items.

STREET DREAMS
Mark Turner is an avid hot rodder—he eats, sleeps and breathes hot rods and muscle cars, and he jumps at any opportunity to add another car to his collection. On one of Turner’s many trips to check on the progress of a Camaro he had being built at G&S Custom Fabrication & Suspension in Athens, Alabama, owner Greg Blaydes told him about a ’67 Camaro RS/SS convertible being built whose owner had lost interest and was looking to get out from under the car.

Hold It Right There!
Unlike a regular car door, the back door of a sedan delivery is often left open for loading, unloading and so on. With nothing to hold it open, the slightest breeze will slam it because when a delivery is dumped in the front as ours is, gravity lends a heavy hand to the slam. We’ve never been knocked unconscious, but we’ve suffered some nasty lumps on the noggin. Worse yet, with no mechanism but the hinges, you never hear or see it coming.
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design

The 2026 Ridler Roundup
For more than 70 years, Detroit Autorama has been the proving ground where the world’s most ambitious custom cars, hot rods, and coachbuilt masterpieces step into the spotlight. What started back in 1953 as a humble fundraiser to build a drag strip has grown into a full-blown celebration of automotive

HAMMERHEAD
Of all the cars that have found favor among super rodders and racers alike, few would argue the appeal of ’39-’41 Willys coupes and pickups, which have enjoyed a powerful attraction since first appearing as gas coupe and sedan drag racers back in the ’60s.

The Crusher
You can’t fault a man for knowing what he likes, and in the case of Chelsea, Alabama’s Mike George, what he likes is the ’69 Camaro. at the age of 41 years old, he’s managed to own no fewer than 15 of these cars over the years, but none was

BARRY BULL SESSION
There are so many good-looking ’32 Ford street rods around, one might think that building a really nice one is easy, but it is not that simple. To begin with, the Deuce is an inherently good-looking car, which presents a two-edged sword. First, you have a great-looking piece to start

STORM WATCH
It seems as if only yesterday that the 2003 Ridler award was presented at the Detroit Autorama. Each year’s event is progressively a tougher call to make, because the cars continue to get better and better, and more expensive in their construction and detail. Some of the most beautiful vehicles

THE 2004 GREAT EIGHT
It was once said, “To aspire to perfection is the goal of all who create, as anything less confines us to conformity,” and never has this been more apparent than in the numerous rodding creations being shaped today. Never before has so much time, effort and expense been lavished on

River Rod Royalty
Inside the 2026 Grand National Roadster Show, the thunder didn’t stop at the hot rods. Tucked among the country’s finest customs and street machines was a killer lineup of vintage ski hydros, circle boats, and heirloom river runners that brought serious waterborne attitude to the show floor. Blown big-blocks, hand-laid

GNRS 2026 Truck Showcase
Hot rodders used to scoff at the idea of trucks stealing the show. Not anymore. The 2026 Grand National Roadster Show (GNRS) proved that custom trucks aren’t just workhorses—they’re rolling showcases of power, design, and pure cool. From slammed classics to full-throttle modern bruisers, trucks dominated the floor, making it

Detroit Riddles
Why is it we build top-end hot rods? We all have many different reasons, but the underlying one will always be to get a little attention. Even though it may not be your sole intent, there is a part of you that wants people to tell you “nice car” or,

Curves, Chrome, and Legacy: Fat Attack 2026
The Fat Attack exhibit at GNRS 2026 rolled in with curves, chrome, and attitude, and at the heart of it all was the undeniable legacy of Pete & Jake’s Hot Rod Parts. Pete Chapouris and Jim Jacobs didn’t just make parts — they made a movement, showing the world that










