2023
There are a few things you need to know about Sonny Wells. First, Sonny, who is a cabinetmaker in Clearwater, Florida, owns an Elkhart Blue 1967 Corvette with a black stinger hood. Actually, his wife, Jill, lets him share the Corvette with her. Second, Sonny has always had a hankering for an old truck. Third, Jill was tired of sharing the Corvette with Sonny and having to listen to him constantly complain that he wanted an old truck. With that in mind, Sonny began his quest for an old pickup.
0Comments
Join installer Eric Leopold as he meticulously upgrades a white ’04 Tundra with a Street Scene (SS) Speed Grille. Follow along as he navigates the challenges, highlighting the careful process of installation, and witness the transformation of this well-converted street truck in Atascadero, California. Discover the ‘rightest’ way to upgrade with precision and attention to detail in this step-by-step showcase. Photos included for a closer look at the seamless transformation.
0Comments
Explore the intricate process of installing a high-performance ZR1/4L80E powertrain into a 1956 Chevrolet half-ton truck chassis. Cimtex Rods in Jarrell, Texas, shares the meticulous steps involved, including fabricating engine mounts, an adjustable transmission crossmember, and a custom aluminum driveshaft. Witness the thoughtful decisions, like setting the engine back for optimal weight transfer and accommodating essential components like intercoolers and superchargers.
0Comments
While attending the Goodguys Nashville Nationals, we happened upon this stunning Studebaker. Its owner, Jeff Wingo, informed us that during his high school years this same Studebaker served as his daily driver, providing him a ride to and from school and around town. Now a fast-paced computer consultant, Wingo travels around the world, which has allowed him a better lifestyle compared to his teen years. He also has two young sons, Grant and Jack, who love their dad’s cool truck. Let’s rewind to the summer of 2000, when Wingo made the decision to resurrect the tired and worn pickup.
0Comments
Tilt steering, cruise control, heated seats and A/C are all amenities that we have grown accustomed to without ever knowing it. We’ve come to expect our seat to power forward and our steering column to drop at the flick of a lever; after all, it’s a matter of driver comfort. As these driver comforts have become a part of our daily drivers, it’s not unthinkable that we would want the same for our classic trucks. Our resident ’68 Chevy makes the rounds to and from lunch, along with the occasional cruise-in, so why not build in many of the same conveniences? After looking online, we decided that our outdated straight column just had to go, and then we’d work on the rest of those comfort items.
0Comments
The pictured F-100 is a 1954 model, and it was purchased by Carl and Marianne Lewis from Milwaukie, Oregon, in 1992. The truck had seen better days, as it had been sitting out in the elements under an awning next to a storage shed. In primer, and with a transplanted 289 small block, the truck was partially disassembled as it sat on four flat tires. It had not been moved for some 10 years. Mel Nichols was hired for the much needed makeover, which took 3-1/2 years to complete.
0Comments
Let’s face it: The new, hot truck of the hobby is the 1960-1972 Chevy. With the amenities available for these trucks they have become modern classics. The Chevy truck was available with power steering, A/C, IFS and a host of other great goodies, including power disc brakes. While still not up to today’s standards, with a little tweaking they make really great options on a classic truck without having to break the bank to have cold air and comfortable seats. The only downfall to this is that they are outdated.
0Comments
The white ’99 Silverado was beginning to show the wear and tear of fighting the highway wars the last few years. The once proud and pampered show truck—a standard cab shortbed with matching cab-high camper shell—hadn’t spent much time in daily service until recent years, but now it bore its share of dings, dents and scratches. It was obvious that the 50,000 miles on the odometer hadn’t done the 5.3-liter V-8 much good. Part of the reason for the dissipated performance was the exhaust system, a very tired, less-than-top-quality aftermarket after-cat that had started banging, squeaking and leaking.
Installing a new after-cat from MagnaFlow was at the top of this owner’s agenda. He acquired a MagnaFlow (part No. 15617) polished stainless steel after-cat performance system for his Chevy, and because he’s in the automotive business and has a lift at his own facility, all he had to do was enlist the help of a colleague experienced in exhaust system installs to lend a hand with the hookup.
0Comments
In the ’50s, home-delivery baker Helms Bakery went door to door, delivering bread and bakery goods on the streets of Southern California. All you had to do was call and order what you needed, and the next day it was delivered to your door. You could also stop the drivers on their route to buy their goodies, and that’s how we remember the early ’50s Chevy Helms delivery trucks. We figured they must have a rather large fleet of them to cover the L.A. Basin. We aren’t sure exactly when it happened, but no doubt rapidly changing family lifestyles took their toll, and Helms stopped the delivery portion of the business. As a result, there were a lot of early Chevy panel trucks that went somewhere.
0Comments
The 2007 Cadillac Escalade ESV was one of the most eagerly anticipated SUV releases in recent history. The ESV is spacious, powerful and elegant from the factory, but most owners will choose to add their own touches to personalize this truck, just as they did with the old one. Ryan Friedlinghaus, owner of West Coast Customs in Corona, California, wanted to personalize his own Escalade ESV, but he wanted to do it in a stealthy and subdued sort of way so that he could then offer the WCC package to other Escalade owners.
0Comments
