TheAutoBuilder.com

Street Trucks

BUDDY’S BUILD

They say don’t mess with it if it isn’t broken. This straightforward build of a 2006 Honda Ridgeline RTL puts that advice into practice. Honda’s foray into the truck realm seems to have tapped into something big: that some people really want their truck to be more like a big, spacious car. Those people, for whatever reason, like the idea of driving a truck, but deep down they prefer something more comfortable and more refined. That is exactly what the Honda Ridgeline delivers.

So when Buddy Rice, Honda and Fesler Built started talking about customizing a Ridgeline, the conversation didn’t involve an all-out overhaul. Instead the team wanted to rely on the designed-in features that have made the Ridgeline so popular.

0Comments

IFS Install on Chevrolet C-10 Pickup Trucks (1960-1987)

Let’s face it: The new, hot truck of the hobby is the 1960-1972 Chevy. With the amenities available for these trucks they have become modern classics. The Chevy truck was available with power steering, A/C, IFS and a host of other great goodies, including power disc brakes. While still not up to today’s standards, with a little tweaking they make really great options on a classic truck without having to break the bank to have cold air and comfortable seats. The only downfall to this is that they are outdated.

0Comments

AFTER-CAT INSTALL

The white ’99 Silverado was beginning to show the wear and tear of fighting the highway wars the last few years. The once proud and pampered show truck—a standard cab shortbed with matching cab-high camper shell—hadn’t spent much time in daily service until recent years, but now it bore its share of dings, dents and scratches. It was obvious that the 50,000 miles on the odometer hadn’t done the 5.3-liter V-8 much good. Part of the reason for the dissipated performance was the exhaust system, a very tired, less-than-top-quality aftermarket after-cat that had started banging, squeaking and leaking.

Installing a new after-cat from MagnaFlow was at the top of this owner’s agenda. He acquired a MagnaFlow (part No. 15617) polished stainless steel after-cat performance system for his Chevy, and because he’s in the automotive business and has a lift at his own facility, all he had to do was enlist the help of a colleague experienced in exhaust system installs to lend a hand with the hookup.

0Comments

PEDAL PUSHER

In the ’50s, home-delivery baker Helms Bakery went door to door, delivering bread and bakery goods on the streets of Southern California. All you had to do was call and order what you needed, and the next day it was delivered to your door. You could also stop the drivers on their route to buy their goodies, and that’s how we remember the early ’50s Chevy Helms delivery trucks. We figured they must have a rather large fleet of them to cover the L.A. Basin. We aren’t sure exactly when it happened, but no doubt rapidly changing family lifestyles took their toll, and Helms stopped the delivery portion of the business. As a result, there were a lot of early Chevy panel trucks that went somewhere.

0Comments

TRUCK OF THE YEAR

While attending the Goodguys Nashville Nationals, we happened upon this stunning Studebaker. Its owner, Jeff Wingo, informed us that during his high school years this same Studebaker served as his daily driver, providing him a ride to and from school and around town. Now a fast-paced computer consultant, Wingo travels around the world, which has allowed him a better lifestyle compared to his teen years. He also has two young sons, Grant and Jack, who love their dad’s cool truck. Let’s rewind to the summer of 2000, when Wingo made the decision to resurrect the tired and worn pickup.

0Comments

30 Years And Counting

Television has created an unusual interest in all things high-performance, both cars and trucks. On any night you can watch some creation of modified vehicles, and even though there’s not much reality to the builds, you can get a good idea of what’s going on. But don’t get your hopes up: Unlike the team of experts that supposedly does this in a week, your build will probably take six months or more, and longer at some shops. While you can witness a number of world-class cars rolling across the auction block, commanding huge prices from over-?enthusiastic bidders, you will find that this, too, is not the reality that most of us live in each day, as many auction samples are some of the more rare in existence. The one thing each of these shows has in common is that typically the owner rarely gets his hands dirty and if there is any owner involvement, it is often limited to writing a check.

This no doubt is a great way for some to enjoy the hobby, but it’s not the approach that most enthusiasts take, and that includes Rick Finzer. As a way of introduction, Finzer is the event coordinator for a much respected Florida car show and swap meet known as the Turkey Run. The legendary Turkey Run is celebrating its 33rd anniversary and is well known by most enthusiasts, and Finzer has been involved since its inception.

0Comments

PACKED WITH POTENTIAL

The Power Programmer is designed so that once the parameters are established and loaded, the unit is pulled and the program remains in the onboard computer until you elect to remove it. The HyperPAC is different; this unit stays in place. In addition to the three stages of performance tuning—the HyperPAC has all of the performance programming benefits of the Power Programmer—it also has diagnostics; an engine monitor with a complete gauge display; a dynamometer, which includes such items such as a horsepower graph; and our favorite, a dragstrip program. This program actually monitors real-time engine operating conditions, has a Christmas tree start, displays a timeslip and will provide you with “magazine-type road test” acceleration times in 10-mile increments. It will record and display important engine operating conditions throughout the run and will display drive wheel horsepower versus vehicle speed after each run—in both table and graph formats.

0Comments

FAMILY CRUISER

Langston, a longtime rodder and home builder, has owned several awesome rides in the past, including a ’63 Vette convertible, a ’51 Chevy pickup and an ’84 Chevy street truck. The only problem with all of these cars is that they are two-seaters—one driver and one passenger. Alan and his wife, Amy, have three boys who absolutely love hanging with their dad at the rod shows. Since Alan and Amy needed room for Sam, Jacob and Trace to ride when going to and from the local rod runs, they decided to build a vehicle that would provide enough room for five, and plenty of room to load up and go on trips. Alan decided that since he’d previously owned a ’51 and loved it, the ride would be an Advanced Design Chevrolet.

0Comments

GET IT HANDLED

Before the advent of the “smoothie look,” people were slicking down the lines of their cars and trucks in numerous ways, and shaving door handles was one of the more popular mods. Today the trend is to fit later-model door handles rather than no door handles at all. This still provides a simple way to clean up your vehicle with very little effort, yet retains the convenience of manually opening the door. If you have the patience, talent and imagination, you can borrow the parts from a donor car or truck and fit them to your own project, thereby achieving a cool, smooth look that will be unique to your vehicle.

0Comments

RILEY’S ’72 Chevy

It seems never to fail: You buy an old truck from a friend or family member with the intent of just sticking a used motor in it and giving it a quick paint job. This usually means that the front clip comes off to put the motor in, and that leads to taking apart the front suspension, which leads to assorted chassis upgrades, as well as the rest of the frame components being unbolted and stripped down for paint, and that means the cab is taken off and sent to a paint shop. Well, you know how those stories play out, and without going any further, this is exactly what happened to Jim Riley and his son Dusty.

0Comments
Scroll to Top

Subscribe to our weekly newsletter!

* indicates required
Interests

For information about our privacy practices, please visit our website.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.