TheAutoBuilder.com

Street Trucks

AIR SUPPLY

Air conditioning is a luxury that most early truckers agree they can’t be without, especially when they reside in a hot part of the country. But those big, clunky compressors, huge receivers hanging below the dash, bulky hoses running all over the place and extra wires showing are some of the reasons why air conditioning has deterred hardcore rodders for years. Of course, Vintage Air has eliminated those concerns with an excellent add-on system that not only works well, but also coexists with your engine compartment and interior aesthetics.

Vintage Air has kits that are designed for specific applications as well as universal kits. Its kits provide all of the required mounting hardware, brackets, vents, hoses, fittings, ducting, electrical wiring and switches needed to get you through your project. If you have any problems, Vintage Air has a tech support line that is second to none. You have a choice of either the internet or telephone (weekdays only).

0Comments

F(AST)-150

When it comes to improving horsepower, one of the main names is Magna Charger. Long known for its supercharger systems for Chevy pickups and even hot rods, Magna Charger has more recently turned its attention to the Blue Oval. It was in late 2005 that the company introduced a system for the ’04-’06 Ford F-150 pickup truck equipped with the 5.4-liter Triton engine. Aiming to improve horsepower and torque in the 1,200-5,500-rpm range, Magna Charger chose to utilize its fifth-generation MP112 hybrid Roots-style supercharger system in this effort. The Gen 5 is equipped with an internal bypass valve, which the Magna Charger folks say reduces parasitic losses while cruising for increased efficiency and economy. Also, the Magna Charger system is intercooled, and everyone knows that cool air is denser than hot air, and denser air makes more power.

0Comments

WATER, WATER EVERYWHERE

Now, it may seem crazy that anyone would take sandpaper to a new paint job, but if you want to have a glass-like finish that is exactly what happens. Of course, it is special sandpaper, and the person doing the work needs to know exactly what he is doing or that paint job can be toast. One of the things that makes color sanding possible is that the paper used is meant to be wet while the job is taking place. The water not only works as a lubricant, but it also removes the fine paint sludge from the area. The problem is getting that water in the proper place and having enough of it to do the job. After all, who really likes sticking his arm into a cold bucket of water time after time?

0Comments

Interior Design

When Jorge Torres was young he would help his father around his shop. Named after the senior Torres, Armando’s Custom Upholstery in San Jacinto, California, opened in 1989 when Jorge was still in high school. In 1992, he began working full time with his father and brother, Armando Jr. He stared doing old cars and went to a few shows to promote their work. During this time he mentioned to his dad that he wanted to build a 1969 Chevy pickup. It turned out that his dad had a friend who owned one, but he was told that the truck was in pretty rough shape. All Jorge heard was that the price, at $1,500, was in his range.

0Comments

Blank Canvas

The longer we are in this business, the more we are certain that the one skill which is most important to know is how to paint. A custom painter can take nearly anything and turn it into a fine ride. Sure, those who can work on suspension or engines are able to take their specialty and turn it to their advantage, but no one modification makes more impact than a cool paint job. That is why guys such as Sam Spinelli, a custom painter for more than 12 years, can cruise around town in this 1990 Chevrolet C1500. Adorned with a killer basecoat and an amazing set of flames, it would be a show truck for the rest of us, but he simply describes the Chevy as his daily driver.

0Comments

CIMTEX SUPER CAMEO: PART 5

When we selected a Chevrolet Corvette ZR1 twin-cam, small-block 350 V-8 engine for our Cimtex Rods Super Cameo, we knew that we would be breaking new ground in the sense that GM never built a “production” automatic-transmission-equipped Corvette ZR1. However, there is record that a couple of Corvette ZR1s were specially equipped with automatic electronic overdrive transmissions for physically challenged Corvette enthusiasts. We don’t know whether it was done by the factory or by the private sector.

Nonetheless, it was our intent to run an automatic transmission behind this awesome powerplant. After all, we wanted our ’56 Super Cameo to be as civilized as possible, yet still be able to handle all the available torque and horsepower that will be the result of this twin Powerdyne (BD11-A) supercharged and intercooled Corvette ZR1 engine. But what type of GM automatic transmission would we actually be using?

0Comments

ON THE LEVEL

The ’07 Tahoe, Chevrolet’s premature baby, hit the street in late March 2006. Introducing the next generation of Tahoes so early was part of some master marketing scheme, born and nurtured in the hallowed halls of Chevrolet corporate. In any case, the ’07 Tahoe’s rear ride height measured 23-1/8 inches from the center of the hub to the lip of the fenderwell, while the front measured only 20-1/4 inches. As usual, the rear stood considerably higher than the front.

0Comments

BIG THINGS COME IN SMALL (BLOCK) PACKAGES

The owner of this ’77 Chevy pickup got tired of the performance and poor fuel economy of the truck’s 350 small block, and rather than rebuild the engine, he decided to replace it with something better. If there’s an engine better than a small-block Chevy, it’s one of Chevy’s new Gen-III small-block engines, which include the Vortec truck motors, LS1/LS6, and even the new LS2/LS7.

0Comments

Remembering When

When Ricardo Lopez began building this 1955 Chevy he had some help, as well as a plan. In the beginning, this little Chevy pickup was to provide an excellent chance for Ricardo to spend some time with his son, Ricky, and to be able to show the boy some of the tricks that he had learned over the many years he had worked as a customizer, bodyman and painter. As owner of Paint By Lopez in Compton, California, Ricardo had hopes of his boy taking over for him in the years to come, maybe even calling the shop Paint By Lopez & Son. Unfortunately, Ricky was taken from Ricardo and his wife, Monica, in a freak accident. At first Ricardo was going to sell the truck, as the sight of it was almost too much to bear. But upon reflection he changed his mind. Ricardo thought that finishing the project was not only a perfect way to work through his grief, but it would also give him a chance to feel connected to the son he had lost. When the Chevy was completed, it would be a way to honor Ricky’s memory.

0Comments
Scroll to Top

Subscribe to our weekly newsletter!

* indicates required
Interests

For information about our privacy practices, please visit our website.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.