If you’ve ever imagined a time when you could simply pick up the phone or send an e-mail to General Motors and order the engine of your dreams, pull it out of a box delivered to your door and plug it into the car of your dreams, then stop dreaming as that time has come. While it’s not new information that GM Performance Parts provides an assortment of engines to choose from, it’s never been easier to select the one that is best for your budget and the intended purpose of your car.
Just about any gearhead would be thrilled by the opportunity to work with legendary automotive collector and all-around funny guy Jay Leno. Dave Killackey, owner of Performance Transmissions in Azusa, California, not only had the opportunity to work on a number of Leno’s projects, but along the way he’s developed a friendship with the late-night TV host. It’s a close enough friendship that Leno teamed with automotive designer Chip Foose and his “Overhaulin’” TV show to completely transform his rusted-out ’56 Chevrolet Nomad. So yes, you did read this correctly; Dave Killackey is indeed one of the luckiest car guys on the planet—he’s friends with Jay Leno, and he owns a ’56 Nomad that has been overhauled by Chip Foose and the rest of his team.
Have you ever seen a pictorial like this that tells where the location actually is? We didn’t think so, but don’t you just love a good mystery? Good, because that’s exactly how the owner wanted this incredible story left: unfinished. So we had to make part of it up. But which part? The interesting thing is this: Just when you think there are no old cars left to rebuild, think again!
One day, Ron Jones was walking around a consignment lot looking for his next rodding project. He had gone there with the intention of checking out a particular car, a ’29 Ford, but while there he noticed another vehicle that caught his eye. Tucked in the back of the lot was a ’49 Cadillac sedanette. It was mostly white and in rather poor shape, with dents, body filler and a little rust as evidence of a neglected existence. But Jones saw the car and knew he had to have it.
Roadsters have an appeal that’s hard to beat—especially ’32s. No matter where you go, they’re all the rage. It’s not just the hand-built one-offs we’re talking about either; it’s real street roadsters that scream at the heart of cool. For instance, take a close look at Chris Boutilier’s slick ’32. Chris has managed to blend the past with the present, while adding his own pizzazz. His roadster not only looks right, but it also drives like a dream and easily wins awards when he chooses to show it off.
Low in its architecture and functionally beautiful, the LS2 engine is an ideal replacement for a previous generation of Chevy powerplants. It offers good
performance, greatly improved economy and plenty of support from an industry leaders.
In 1999, Stotts decided to replace the carbureted 350, which was installed in 1991, with a Corvette TPI motor. Stotts wanted to bring the car into the new millennium with style, adding the extra convenience of electronic fuel injection. A resident of Mena, Arkansas, Stotts visited nearby Street & Performance to get started on his project. The S&P guys are well-known for being wizards when it comes to figuring out how to stuff an EFI motor in an older car and actually making it work.
Bob Gruitch just thought his car was not performing up to his expectations. A ’55 Chevy equipped with a 502 big block, square port heads and a Crane H296-2 camshaft should be more than enough power. But it lacked power and didn’t idle all that well, especially in gear. This shouldn’t be happening with an engine built by John Gianoli at Reggie Jackson’s High Performance Engine Shop, so Gruitch figured he had something wrong and brought the car to John Bishop’s Hot Rod Tuning Service to have it checked. He’s lucky that he did.
When GM introduced the Gen III small block in the F-body, it rekindled a dying performance flame with its new-generation small block. While the Gen I small block actually kick-started the hobby and got it into gear, it’s the latest family of small-block engines that has grabbed the attention of enthusiasts everywhere—and for good reason.
Cam-speak is a language all its own. Well, maybe not from a linguistic point of view, but it is a specialized dialect of car-guy talk. Although spoken by a good portion of enthusiasts, Cam-speak is really fully understood by only a handful of those same enthusiasts, as it is a very specialized, nuanced dialect. Those who do not speak the lingo can instantly be singled out. Those who are fluent in cam-speak are listened to intently, even when those listening do not fully comprehend whatʼs being said and how to apply it to their particular applications. Few within our ranks are particularly fluent in this highly specialized jargon.
