Featured

Trucks are hot, and this interest in trucks has been getting hotter over the years. This is not something that started recently, and now with so many companies like Chevs of the ’40s, Early Classic Enterprises, Street & Performance and SSBC offering specific performance parts, you are now able to find such truck-specific parts as replacement sheetmetal, LS1 engine swaps, tubular suspension components and enormous brake systems.

IMPRESSION

In terms of historic automotive achievements (and there have been many, to be sure), this stylized ’36 Ford roadster will long be remembered for its most human elements. Through them, a vehicle of unparalleled execution—at least to date—regardless of type, style or vintage, has come of age. Only slightly reminiscent of the car it is based upon, the lines expressed through the flowing body and adjoining components, and all of the well-placed details, give one the impression of speed, style and a hint of great classics of the past. And while it may take on a hint of flavor of classics past, the overall concept is entirely its own—a coach-built car done for these modern times.

24 PERFECT PARTS AND TIPS

Are you driving an old truck, or perhaps you are driving a newer, modified pickup that is being upgraded as you go? Either way, both present their own set of challenges, which when not addressed, will turn normal operation into a nightmarish chore. No one enjoys breaking down along the side the road, so you do what you can to favorably stack the odds against such breakdowns. Truth is you do this by eliminating the simple oversights and by selecting the right parts that enhance the performance and operation of your daily driver.

Spotlighter

SUPERBIRD REBIRTH

Replacement Sheetmetal Panels From Year One Recreate a Solid Body for a Complete Restoration

Author

Josh Kaylor

Photography by Bill Woodard

The Introduction of the 1970 Plymouth Superbird

In 1970 Plymouth introduced the Superbird. It was equipped with an aerodynamic nose, a shape that was ahead of its time, and it had a ridiculously high wing that gave it track performance and a unique trademark. Only in 1970 were the Superbirds produced, and a mere 1,920 left the factory. Of those, 23 percent were painted Lemon Twist. The Superbird did very well in NASCAR, as it won its first race at the 1970 Daytona 500, with Pete Hamilton behind the wheel of a Petty Enterprises Plymouth. After it did so well in ’70, NASCAR developed a rule stating that winged cars were limited in engine size, and so Chrysler decided to pull the plug on the program.

The Decline and Resurgence of the Superbird

In 1971, Plymouth introduced the new model year of cars, and the Superbirds just sat on showroom floors, as dealers almost couldn’t give them away due to their high price and unusual styling. With the sudden rage in anything Chrysler and Plymouth from the ’60s and ’70s, people are beginning to pull these spectacular-looking cars out of hiding and spend some serious money to bring them back to life.

Jim Smith’s Lemon Twist Superbird

Jim Smith of Dayton, Tennessee, has owned this Lemon Twist 440 four-barrel car since it was new. Jim was the owner of Smith-Clayton Dodge in the early days and purchased this car for himself. After some years Jim retired but kept the Superbird seen here behind his barn. Eventually, he decided that it was time to bring it back to life.

The Restoration Process Begins

To do so, Jim enlisted the help of Bill Woodard, longtime friend and master bodyman. Bill and Jim determined what they would need for the Superbird and then called Year One, located in Braselton, Georgia, for the beginning of a long list of parts that would be required to bring the car to as-new condition. In about a week, new trunk floors, wheel housings, and rear quarter panels arrived at the shop, and the work began. We plan to follow this car through to completion, so read along as we revive one of America’s most sought-after muscle cars.

1. The driver’s side of the quarter panels was missing the bottom couple of inches, and it looked as if it had been crushed at a NASCAR event.

2. The trunk floor and the floorboards were full of rust holes where water leaked in and sat in the trunk, which deteriorated the sheetmetal.

3. The trunk floor was rough, as you can see in the photos. It was easier to drill out the spot welds and replace the rotted floor with a new one from Year One.

4. The trunk floor was completely removed from the car to accommodate the new pieces. The steel frame has surface rust but is not rusted through anywhere.

5. Installing the new trunk floor will require a few tools and a full weekend. A side grinder, a drill equipped with a hole saw and a small bit also will be needed.

6. The new floorboards come with original-style high-quality stamping, which resembles that of the OEM parts.

7. The side portion of the trunk was gone, so Bill clamped the side portion to a piece of the new floorboard and welded them together.

8. These are nice parts. Year One prides itself on trying to make every piece fit better and look nicer than the originals.

9. Each of the braces has held water, as you can see, which helped the rust grow. The braces are cleaned up to prevent any further damage from occurring.

10. If you are wondering what all these lines are, Plymouth spot welded the floor along these lines every 3 inches.

11. Here you can see Bill as he traces the next piece for the lines.

12. Bill is a perfectionist: A ruler was used to make sure that every 3 inches a hole was drilled for spot welding. This car is being restored back to factory-original condition.