July 16, 2023
When we selected a Chevrolet Corvette ZR1 twin-cam, small-block 350 V-8 engine for our Cimtex Rods Super Cameo, we knew that we would be breaking new ground in the sense that GM never built a “production” automatic-transmission-equipped Corvette ZR1. However, there is record that a couple of Corvette ZR1s were specially equipped with automatic electronic overdrive transmissions for physically challenged Corvette enthusiasts. We don’t know whether it was done by the factory or by the private sector.
Nonetheless, it was our intent to run an automatic transmission behind this awesome powerplant. After all, we wanted our ’56 Super Cameo to be as civilized as possible, yet still be able to handle all the available torque and horsepower that will be the result of this twin Powerdyne (BD11-A) supercharged and intercooled Corvette ZR1 engine. But what type of GM automatic transmission would we actually be using?
0Comments
When Jorge Torres was young he would help his father around his shop. Named after the senior Torres, Armando’s Custom Upholstery in San Jacinto, California, opened in 1989 when Jorge was still in high school. In 1992, he began working full time with his father and brother, Armando Jr. He stared doing old cars and went to a few shows to promote their work. During this time he mentioned to his dad that he wanted to build a 1969 Chevy pickup. It turned out that his dad had a friend who owned one, but he was told that the truck was in pretty rough shape. All Jorge heard was that the price, at $1,500, was in his range.
0Comments
Langston, a longtime rodder and home builder, has owned several awesome rides in the past, including a ’63 Vette convertible, a ’51 Chevy pickup and an ’84 Chevy street truck. The only problem with all of these cars is that they are two-seaters—one driver and one passenger. Alan and his wife, Amy, have three boys who absolutely love hanging with their dad at the rod shows. Since Alan and Amy needed room for Sam, Jacob and Trace to ride when going to and from the local rod runs, they decided to build a vehicle that would provide enough room for five, and plenty of room to load up and go on trips. Alan decided that since he’d previously owned a ’51 and loved it, the ride would be an Advanced Design Chevrolet.
0Comments
Television has created an unusual interest in all things high-performance, both cars and trucks. On any night you can watch some creation of modified vehicles, and even though there’s not much reality to the builds, you can get a good idea of what’s going on. But don’t get your hopes up: Unlike the team of experts that supposedly does this in a week, your build will probably take six months or more, and longer at some shops. While you can witness a number of world-class cars rolling across the auction block, commanding huge prices from over-?enthusiastic bidders, you will find that this, too, is not the reality that most of us live in each day, as many auction samples are some of the more rare in existence. The one thing each of these shows has in common is that typically the owner rarely gets his hands dirty and if there is any owner involvement, it is often limited to writing a check.
This no doubt is a great way for some to enjoy the hobby, but it’s not the approach that most enthusiasts take, and that includes Rick Finzer. As a way of introduction, Finzer is the event coordinator for a much respected Florida car show and swap meet known as the Turkey Run. The legendary Turkey Run is celebrating its 33rd anniversary and is well known by most enthusiasts, and Finzer has been involved since its inception.
0Comments
The ’07 Tahoe, Chevrolet’s premature baby, hit the street in late March 2006. Introducing the next generation of Tahoes so early was part of some master marketing scheme, born and nurtured in the hallowed halls of Chevrolet corporate. In any case, the ’07 Tahoe’s rear ride height measured 23-1/8 inches from the center of the hub to the lip of the fenderwell, while the front measured only 20-1/4 inches. As usual, the rear stood considerably higher than the front.
0Comments
The Power Programmer is designed so that once the parameters are established and loaded, the unit is pulled and the program remains in the onboard computer until you elect to remove it. The HyperPAC is different; this unit stays in place. In addition to the three stages of performance tuning—the HyperPAC has all of the performance programming benefits of the Power Programmer—it also has diagnostics; an engine monitor with a complete gauge display; a dynamometer, which includes such items such as a horsepower graph; and our favorite, a dragstrip program. This program actually monitors real-time engine operating conditions, has a Christmas tree start, displays a timeslip and will provide you with “magazine-type road test” acceleration times in 10-mile increments. It will record and display important engine operating conditions throughout the run and will display drive wheel horsepower versus vehicle speed after each run—in both table and graph formats.
0Comments
It seems never to fail: You buy an old truck from a friend or family member with the intent of just sticking a used motor in it and giving it a quick paint job. This usually means that the front clip comes off to put the motor in, and that leads to taking apart the front suspension, which leads to assorted chassis upgrades, as well as the rest of the frame components being unbolted and stripped down for paint, and that means the cab is taken off and sent to a paint shop. Well, you know how those stories play out, and without going any further, this is exactly what happened to Jim Riley and his son Dusty.
0Comments
It can be argued that one of the best mods you can make to an LS-based or Gen III motor is a camshaft change. With the number of aftermarket companies making many different types, a good cam can be found for anywhere from $300 to $1,000, depending upon what type of power you want to make and how sophisticated the cam package is. Because 99.99 percent of all vehicles on the road today are computer controlled, most aftermarket companies are able to suggest whether a new tune will be necessary or if the stock one will suffice. But with so many different options out there, it can be quite confusing as to which is the right one for you.
0Comments
In Hawaiian, “wiki wiki” can mean “hurry” or “fast,” depending on its use and interpretation.
New Zealand-born transplant Kim Greenwell’s Kahului, Maui-based black-on-black, 1988 GMC Sierra 1500 is definitely “wiki wiki” with its 500-plus-horsepower, Whipple-supercharged 383 small-block stroker. Greenwell’s basic intent was to build a stock-bodied hot rod pickup that he could use to advertise his automotive repair business, Kiwi Car Care. “I was looking for a nice, straight, rust-free truck that I could paint black,” says the Kahului automotive repair shop owner. “This truck was perfect. It was low mileage, and the price was right. But the brown color definitely had to go!” That’s not the only thing that got changed. “I kept the outside of the truck as stock as possible, but under the hood it’s a true sleeper.”
0Comments
Those who know Ottawa, Kansas Roger Ward are almost certainly aware of his dry wit, his candid demeanor and his unique ability to create understated cars, one after the other. His talent in applying the most understated details to relatively unsung vehicles provides a lesson for us all that the best way to make a strong statement is to say as little as possible and do it your own way.
While his daily duties revolved around reworked body panels and refining those efforts with a paint gun, his lifelong hobby has focused those skills on a series of cars that exudes the same laid-back character which can be enjoyed in this extremely subtle, yet equally eye-?catching, 64 short-wheelbase Chevy pickup. As with so many trucks of this era, previous owners didn’t worry too much about retaining its pristine originality. Dented and rusty, this truck had been through the proverbial ringer, which made this conversion that much more difficult to achieve. Then again, Ward’s particular talents have made a great deal out of lesser vehicles, so this would simply be another test of his talents and another example of the skills he wields.
0Comments
