TheAutoBuilder.com

Trucks

Interior Design

When Jorge Torres was young he would help his father around his shop. Named after the senior Torres, Armando’s Custom Upholstery in San Jacinto, California, opened in 1989 when Jorge was still in high school. In 1992, he began working full time with his father and brother, Armando Jr. He stared doing old cars and went to a few shows to promote their work. During this time he mentioned to his dad that he wanted to build a 1969 Chevy pickup. It turned out that his dad had a friend who owned one, but he was told that the truck was in pretty rough shape. All Jorge heard was that the price, at $1,500, was in his range.

0Comments

PACKED WITH POTENTIAL

The Power Programmer is designed so that once the parameters are established and loaded, the unit is pulled and the program remains in the onboard computer until you elect to remove it. The HyperPAC is different; this unit stays in place. In addition to the three stages of performance tuning—the HyperPAC has all of the performance programming benefits of the Power Programmer—it also has diagnostics; an engine monitor with a complete gauge display; a dynamometer, which includes such items such as a horsepower graph; and our favorite, a dragstrip program. This program actually monitors real-time engine operating conditions, has a Christmas tree start, displays a timeslip and will provide you with “magazine-type road test” acceleration times in 10-mile increments. It will record and display important engine operating conditions throughout the run and will display drive wheel horsepower versus vehicle speed after each run—in both table and graph formats.

0Comments

Blank Canvas

The longer we are in this business, the more we are certain that the one skill which is most important to know is how to paint. A custom painter can take nearly anything and turn it into a fine ride. Sure, those who can work on suspension or engines are able to take their specialty and turn it to their advantage, but no one modification makes more impact than a cool paint job. That is why guys such as Sam Spinelli, a custom painter for more than 12 years, can cruise around town in this 1990 Chevrolet C1500. Adorned with a killer basecoat and an amazing set of flames, it would be a show truck for the rest of us, but he simply describes the Chevy as his daily driver.

0Comments

CIMTEX SUPER CAMEO: PART 5

When we selected a Chevrolet Corvette ZR1 twin-cam, small-block 350 V-8 engine for our Cimtex Rods Super Cameo, we knew that we would be breaking new ground in the sense that GM never built a “production” automatic-transmission-equipped Corvette ZR1. However, there is record that a couple of Corvette ZR1s were specially equipped with automatic electronic overdrive transmissions for physically challenged Corvette enthusiasts. We don’t know whether it was done by the factory or by the private sector.

Nonetheless, it was our intent to run an automatic transmission behind this awesome powerplant. After all, we wanted our ’56 Super Cameo to be as civilized as possible, yet still be able to handle all the available torque and horsepower that will be the result of this twin Powerdyne (BD11-A) supercharged and intercooled Corvette ZR1 engine. But what type of GM automatic transmission would we actually be using?

0Comments

ON THE LEVEL

The ’07 Tahoe, Chevrolet’s premature baby, hit the street in late March 2006. Introducing the next generation of Tahoes so early was part of some master marketing scheme, born and nurtured in the hallowed halls of Chevrolet corporate. In any case, the ’07 Tahoe’s rear ride height measured 23-1/8 inches from the center of the hub to the lip of the fenderwell, while the front measured only 20-1/4 inches. As usual, the rear stood considerably higher than the front.

0Comments

WHEN 5 EQUALS 8

Explore how RKSport’s supercharger kit enhances the performance of Chevrolet’s inline five-cylinder engine, bridging the gap between power and economy, while considering future upgrades for even more performance gains.

0Comments

MORE IS BETTER

Delve into the power principle of better breathing in engines, focusing on the intake side and how Airaid’s intake system improves airflow to increase rear wheel horsepower by up to 18 in late-model GM trucks.

0Comments

The HEAR & NOW

Delve into the world of classic truck customization as we guide you through the installation of a Custom Autosound USA-5 unit into a 1972 Chevy C10. Learn how to seamlessly integrate modern sound technology into your vintage ride without altering its original aesthetics.

0Comments

FUELING THE FIRE

Bully Dog Technologies, located in Aberdeen, Idaho, designs and develops some great bolt-on power products for the diesel aftermarket. Creating these pieces involves literally hundreds of hours in R&D and design work with some of the brightest engineers and technicians around. But, as you can imagine, it’s fun work.

0Comments

PUTTING THE “HAUL” BACK IN HAULER

Learn about McGaughys Suspension Parts’ innovative airbag spring helper kit designed specifically for the 2002-2005 Dodge Ram 1500 series, enabling truck owners to use their street trucks for hauling tasks while still enjoying the benefits of lowered suspension.

0Comments
Scroll to Top

Subscribe to our weekly newsletter!

* indicates required
Interests

For information about our privacy practices, please visit our website.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.