TheAutoBuilder.com

Engine

MAKING GAS

Alternative-fuel sources and hybrid cars are all the rage today. Everyone from major automakers to backyard inventors is pursuing alternative fuels and energy sources. While the ultimate goal is generally to eliminate dependence on foreign oil, for hot rodders there is also the desire to invent and create a better-performing engine.

Firewall Mayhem

Crankshaft trigger mechanisms have been used in racing applications for a considerable length of time. In truth, they’ve actually been in service for decades. It’s a simple known fact that one of the best ways to improve engine performance is to ensure that the ignition timing is stable. That’s the whole purpose behind such a system, and that’s why racers regularly use them.

0Comments

WHAT A CONCEPT

After recently purchasing a ’62 Thunderbird, it became obvious very quickly that the car needed a new engine. Our plan was to turn the car into a daily driver, and so, as long as we needed a new engine, we figured we’d add air conditioning to the car while we were at it. And if you really know your Ford history, you also know that the ’62 was the last model T-bird to come with a generator rather than an alternator—one more reason to consider an upgrade.

GOING PRO

Producing horsepower requires two major ingredients, namely, air and fuel. Of course, the two must be supplied in the correct proportions and at the proper time; but improving power is a simple matter of adding airflow. Naturally, additional fuel will be required once the airflow is improved, but the first item on the horsepower priority list should always be more airflow.

Keeping Your Cool

Even though we all dream of blasting through the desert at 130-MPH like Robby Gordon, most of our 4×4 adventures take place at a much more reasonable pace. Unfortunately for our engines crawling along a boulder strewn dry river bed or climbing a goat trail through a mountain pass does not always allow enough airflow to keep our engines cool with a belt driven mechanical fan. Belt driven fans are designed to keep your engine cool when traveling down a street or highway not while crushing boulders at 3-MPH and 1,500-RPM. So what can we do to keep our rigs from boiling over this summer? Follow along with us as we install a pair of 11-inch electronic cooling fans along with a programmable fan controller both from SPAL USA.

1175 HP

This engine, and others like it, has opened up a brand-new chapter in the ever-evolving, wild world of Chevrolet power. By design it has a bore and stroke of 4.60 inches by 4.25 inches and Big Chief II heads, which are about 2 inches taller, that feature oval-shaped intake ports. This, they say, is for maximum cylinder filling. Years ago, creative racers would angle-mill heads to arrive at the desired combustion chamber size and to improve the valve angle in combination with the incoming intake flow. These heads are nicknamed “11-degree” heads, as they have been designed with a built-in 11-degree angle right out of the box. There’s no angle milling needed here. A special valvetrain is necessary, along with longer stem valves. Quarter Mile Performance feels that these heads are worth 200 additional horsepower over the very best “shorter” heads.

An Overview of Restoration Products

Gone are the days of struggling to find restoration chemicals and parts. The article highlights how the availability of reproduction parts and user-friendly chemical solutions has revolutionized car restoration. It introduces popular and effective chemicals like 3M Underseal Undercoating, Eastwood Self-Etching Primer, and OEM Paints React, highlighting their benefits and applications. It even delves into restoring cast-iron parts, suggesting solutions like OEM Paints’ Steering Gear Box Finish. Get ready to be amazed by the latest advancements in car restoration!

LS Swapping a Classic Jeep CJ

In 1981 this Jeep, that now belongs to Clinton Campbell of Dallas Texas left the factory floor with a straight 6, but he drove it away from Street & Performance with a 5.3 truck LS-1 type engine and a 4L60E transmission. Clinton wanted more performance, drivability and, with the recent enforcement of emission laws in Texas, he needed to be able to pass emissions.

How-to Get Shorty

This article dives into the unique modification of a 1967 Chevy Suburban by Mike Dempsey, who reimagined it into a shorter, Tahoe-styled version. It also features Ken Farrell’s Retro Tek company, which has revolutionized the EFI system to combine the aesthetics of classic cars with the efficiency of modern technology. The article covers various aspects of vehicle modification, including chassis adjustment, engine upgrades, and the integration of advanced fuel systems.

0Comments

SMOKIN’

Allen Cornelius wanted to make a statement that his shop, AC Customs in Shreve, Ohio, could blend old-school Ford muscle-car performance with a new style truck, giving it the performance and looks to match.

0Comments
Scroll to Top