
THE AUTO BUILDER
Featured

SQUIRT GUN
You have to admit that the thought of injecting water into your engine sounds crazy. We all know that water doesn’t burn and it can’t be compressed. Those unfortunate souls who have tried to do this now have engines that are the equivalent of ship anchors. In this installation, we aren’t going to be injecting huge amounts of water into an engine, but rather a fine mist that’s proportionate to the fuel flow (10 percent to 20 percent), using a high-pressure pump. This will help lower the chances of detonation by reducing the intake charge temperature.

STOP, DROP, AND ROLL
From the rugged workhorses of the ’70s to today’s luxurious pickups, discover the transformation and retrofitting process of a ’68 Chevy truck. Follow the journey as No Limit Engineering’s dropped spindle/disc brake conversion kit enhances both braking performance and aesthetics, bringing a touch of modern luxury to a timeless classic. Dive into the details of this four-hour installation and witness the stunning results that elevate the truck’s functionality and appearance. Experience the perfect blend of nostalgia and innovation in this truck restoration project.

From Vegas with Horsepower
Las Vegas, Nevada, baby! Picture this: the Holley LS Fest West roaring into town like a beast on four wheels, revving up the asphalt at the Las Vegas Motor Speedway from April 26-28, 2024. This shindig ain’t your average car meet; nah, it’s a full-throttle celebration of all things LS engine from GM. You got your gearheads from every corner gathering round, ready to rip it up in Autocross, Drifting, Drag Racing, Off-Road showdowns, and then some. But it’s not just about the racing; it’s about the vibe, man. Folks bonding over their love for LS-powered rides, swapping stories, and soaking in that sweet, sweet automotive culture.
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design
California Autofest
Tuners And Hot Rods Converge At California's Largest Racing Facility
Author
Sean Greene
Words & Photography
As an automotive enthusiast, you know that a huge part of our scene is showing the world your pride and joy, and car shows have traditionally been the best places to do so. They give you the opportunity to talk shop with people who share the same passion. Individuals with different makes of vehicles are drawn together by the same love affair, whether they are into Hondas, VWs or Nissans, so these are great networking places to learn and make things happen.
I got this call from JD, our publisher, who told me that I should head over to the California Speedway where the California AutoFest was about to go down. I had never heard of this event and had absolutely no idea what to expect in terms of attendance or caliber of vehicles. Hell, I didn’t even know how big the California Speedway was. Boy, was I in for a surprise.
The California Speedway is humongous and it took quite a while for me to drive around the perimeter before reaching the entrance. I also noticed something else out of the ordinary domestic vehicles. And I’m not talking about Neons, J-body cars or Ford Foci. I mean old-school hot rods. For a moment I thought there was a mistake or that I got lost, but then I noticed that there were imports mixed in the lineup.
Don’t get me wrong; I love old-school domestics with high-displacement engines, blowers and custom paint, but now I was even more curious about the show. How would the import dudes mix with the domestic cats? Apparently, they mixed rather well, but more on that later.
When I first joined the Buckaroo family, there was talk about a rig that had recently been purchased. It was being painted and gussied up to use as a mobile headquarters at various events across the country. I was anxious to see this thing and when I did, I was blown away by its commanding presence. It’s hard to miss the big red Buckaroo rig.
After meeting up with Neil Tjin, we took our initial tour of the show. For all intents and purposes, Tjin is The Man when it comes to the show aspect of things and I’m more the technical dude.
What’s your preference when it comes to cars? Tjin asked.
I told him that I love the old classic machines because the owners really know how to build true show vehicles. They pay attention to every detail and it shows in their finished products just take a look at the engine compartment of a well-executed classic show vehicle. The firewall is so clean that you could eat off it and there isn’t a speck of grease anywhere. Sure, there are trailer queens that never see the road; but if you compare apples to apples, you have to agree the domestic enthusiasts got it down. I pointed a few examples out to Tjin and he agreed.
The flipside was that more classics were sporting four-piston calipers, car audio and fuel injections. So there is some cross-pollination between both groups. That said, there were enthusiasts from both groups admiring each others rides and asking questions. This can only lead to great things down the road, especially in terms of growth as a community and what can be learned from one another.
American Products Company (APC) had its rig and freshly sponsored Team Orange, a group of Nissan S13 drift machines from Japan, on hand with Team Rotora to perform a drift demo for spectators. I always get a kick out of the reactions from newcomers when they watch drifting or import drag racing. The crowd was definitely thrilled by the drifters and wanted more.
There was always something going on at this event. The roar of pushrod engines could be heard during the day as stock car drivers sped around the track. After a while, a monster 4×4 school bus was giving rides to those willing to fork over a few bucks for the honor. Near the Rotora and Kicker display area was a rock climbing setup that you could scale and Loren Ho of Rotora was trying his best to imitate Sylvester Stallone in Cliffhanger. Elsewhere, pushrods and OHC engines competed on the dragstrip to satisfy the need for speed, while others satisfied the need to shed some rubber in the burn-out area in the infield.
The event spanned two days and spectators came out in droves both days to check out California’s best. The import presence was considerably smaller than the domestic turnout, but we know for a fact that it will increase next year, as major changes are in store and more tuners will know about the show.
The California AutoFest promoters did a spectacular job putting this event together. We’re certain there will be more emphasis on the imports next year. And we’ll be there too bigger and better than ever.







