In parts two and three of The Auto Builder’s Cimtex Super Cameo series, we followed along as Cimtex Rods primaries Tim and Darrell Cimbanin instatlled one of Flat Out Engineering’s Corvette C4/C5 front and rear independent suspension crossmember kits beneath a 1956 Chevrolet 1/2-ton pickup chassis.
Of course, this was followed by the actual installation of the 1984-1987 Corvette C4 rack-and-pinion-steering-equipped IFS and the bolting up of the 1984-1987 Corvette C4 IRS, which makes for a pretty nice-handling street truck.
Along the way, some modifications to the Corvette C4 front suspension were made for the sake of simplicity and an enhanced ride. For openers, Flat Out Engineering designed its kit to incorporate a pair of 12-1/2-inch Aldan Eagle 659/450 coilover shock absorbers, which replace the somewhat antiquated GM designed Owens Corning Corvette C4 monoleaf fiberglass front spring.

In Part III of our Cimtex Super Cameo buildup, we’re going to follow along as the guys from the Jarrell, Texas, crew modify the rear framerails on this ’56, “kicking it up” a full 8 inches. In the process, Tim and Darrell will also narrow the Corvette C4 IRS half shafts to achieve the much desired rear tire clearance they need in order to be able to run a set of humongous 20×10 billet wheels wrapped with a set of BFGoodrich radial T/A rubber.

“Building a good truck chassis is just like building the foundation for a house,” says Cimtex Rods’ Tim Cimbanin. “Everything starts at the ground floor. If you don’t have a good foundation, you don’t have anything!”
No truer words were ever spoken, and we’ve been preaching this fundamental information in all our publications.

While attending the 2003 SEMA Show, we ran across Darrel and Tim Cimbanin from Cimtex Rods in Jarrell, Texas. The Cimbanin brothers were there to drum up support and showed us some sketches of their latest truck building project, and what a project it is!