







To say Tom Long has an interest in cars is to say the Pope has an interest in religion. Long has always
To say Tom Long has an interest in cars is to say the Pope has an interest in religion. Long has always been a “car guy,” just like the rest of us. Having owned several specialty vehicles over the years,
Some folks talk about the great muscle car wars of the ‘60s and early ‘70s, but it’s hard to find a car
Some folks talk about the great muscle car wars of the ‘60s and early ‘70s, but it’s hard to find a car guy who experienced it, enjoyed it and still owns the same car. At 66 years of age, Mike Overly was
Bending irons have been used in the industry for many years. We first became aware of how handy they
Bending irons have been used in the industry for many years. We first became aware of how handy they are during a 10-year stint in the can industry.
Boughn started looking for a new truck, and when he saw a shiny red ʼ99 Chevy Sportside Extended Cab
Boughn started looking for a new truck, and when he saw a shiny red ʼ99 Chevy Sportside Extended Cab pickup at his local dealership, he knew it was the one. He purchased the truck and drove it home, but
Big billet wheels, custom suspensions and modern power plants—that’s what we’ve come to expect from a
Big billet wheels, custom suspensions and modern power plants—that’s what we’ve come to expect from a first generation Camaro. And while these items are great if that’s what you prefer, we just can’t help
If there was ever a time of automotive wonderment and absolute freedom among designers and enthusiasts
If there was ever a time of automotive wonderment and absolute freedom among designers and enthusiasts alike, it was the early 1950s. This was a special time when automobile manufacturers were exploring
Forty-four years have passed since Musselman teamed with Boyd Coddington in creating one of the most
Forty-four years have passed since Musselman teamed with Boyd Coddington in creating one of the most amazing rods of its day, an excetpional car that took its place in history as the Oakland Roadster Show's
THE AUTO BUILDER
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design
Featured

SO CLOSE!
We saw extreme boost levels in our quest for horsepower from the little supercharged V-6 with out ’94 Supercoupe. With the Magnum Powers MPx supercharger clearly capable of more airflow than we could support (boost climbing north of 23 psi), it made sense to work on the heads-and-cam combination to better deal with some of that boost.

BIG THINGS COME IN SMALL (BLOCK) PACKAGES
The owner of this ’77 Chevy pickup got tired of the performance and poor fuel economy of the truck’s 350 small block, and rather than rebuild the engine, he decided to replace it with something better. If there’s an engine better than a small-block Chevy, it’s one of Chevy’s new Gen-III small-block engines, which include the Vortec truck motors, LS1/LS6, and even the new LS2/LS7.

1175 HP
This engine, and others like it, has opened up a brand-new chapter in the ever-evolving, wild world of Chevrolet power. By design it has a bore and stroke of 4.60 inches by 4.25 inches and Big Chief II heads, which are about 2 inches taller, that feature oval-shaped intake ports. This, they say, is for maximum cylinder filling. Years ago, creative racers would angle-mill heads to arrive at the desired combustion chamber size and to improve the valve angle in combination with the incoming intake flow. These heads are nicknamed “11-degree” heads, as they have been designed with a built-in 11-degree angle right out of the box. There’s no angle milling needed here. A special valvetrain is necessary, along with longer stem valves. Quarter Mile Performance feels that these heads are worth 200 additional horsepower over the very best “shorter” heads.

HEMI WITH AN ACCENT
We know little about European drag racing, other than our sources tell us it is hotly contested and very popular. Frenchman Herve Caen is a drag racer, and at age 35, is the owner of not one but two silver ’68 ‘Cudas. One is a nitrous-equipped 440 Wedge built by

BAD BOWTIE
Some guys love their Chevys so much that they’ll go out of their way to flush out and record every bit of their cars’ histories. Such is the case with Gene Lavine of Excelsior Springs, Missouri. Lavine is 65 going on 35. A car guy since he was 16, he

FURIOUS PLYMOUTH
Mike Buzzello has always liked Chryslers and once owned a tubbed Plymouth Road Runner. He lives in Omaha, Nebraska, and attends rod runs and car shows regularly with his friend Steve Gantz. One year at a Goodguys show, Buzzello saw an interesting car drive by, but he couldn’t identify it.

Inside the Hottest Booths at SEMA 2025
The SEMA Show stands alone as the ultimate proving ground for the automotive aftermarket world. No other event brings this level of innovation, craftsmanship, and straight-up creativity together in one place. Everywhere you turn, there’s something new—fresh tech, wild ideas, and custom builds that push boundaries in ways only SEMA

SUBTLE CONVERSION
If you’re searching a crowd, you’ve got to look hard, and still you might miss the builder of this astounding yet subtle Corvette. It’s almost as if the man and his cars are one and the same—loaded with talent, with their most impressive aspects available only to those who take

CHEVY TRUCK ID: 1934-1972
Most of our truck-building buddies can date and identify any truck you can come up with from any distance, even from deep in a grove of trees and clear across a fairground show-’n’-shine. That’s what truck guys do: They enjoy identifying a rusted old fender at a swap meet…

The Hottest Trucks We Spotted at SEMA 2025
If there’s one thing SEMA delivers every year, it’s jaw-dropping builds—and the hottest trucks at SEMA 2025 didn’t disappoint. From slammed classics to high-flying off-road monsters, each build brought massive personality, insane attention to detail, and a presence that made the show floor buzz. These weren’t just trucks—they were rolling

Pyramid Optimized Design: The Builder’s Secret Weapon
When a build needs to go from “cool idea” to “everyone’s talking about this,” the pros call Pyramid Optimized Design. They’re the team behind some of the most talked-about show cars on the planet — using custom automotive design services to transform raw ideas into fully engineered, show-winning, road-ready components.

Our SEMA 2025 Hot List
SEMA always delivers sensory overload — the unveilings, the crowds, the horsepower echoing off every hall. But this year, the real thrill came from the unexpected. Tucked between the headline builds and mega displays were the parts that made us slow down, lean in, and say, “Okay… now that’s something

Metal, Muscle & Mastery: Inside SEMA’s Battle of the Builders 2025
Every November, the SEMA Show turns Las Vegas into the beating heart of the custom car world—but one showdown always steals the spotlight: the Battle of the Builders 2025. It’s the aftermarket industry’s ultimate test of skill, creativity, and innovation—where the best in the business fight for glory and the
THE AUTO BUILDER
Featured

PRODUCT SPOTLIGHT: Canton’s GM LS1-LS6 5-5/8″ Deep Front Sump Road Race and Drift Pan
We here at The Auto Builder understand that when it comes to performance, every component counts. That’s why the Canton Racing Products GM LS1/LS6 Front Sump Road Race and Drift Pan has earned a top spot on our must-have list for any serious gearhead looking to elevate their game.

TIME Challenger
The camouflaged prototypes hadn’t long been out of the shed when news of the new ’09 Challenger rushed into mainstream auto circles. The first production models hadn’t even heated pavement and the lore began as already-enthusiastic aficionados began concocting legends of greatness, as they shaped this car’s history before it ever turned a wheel—and they weren’t a minute too soon!

POWER PICKUP!
To say Tom Long has an interest in cars is to say the Pope has an interest in religion. Long has always been a “car guy,” just like the rest of us. Having owned several specialty vehicles over the years, he still has a ’32 Ford sedan street rod that has seen many miles from coast to coast. But Long had a real urge to own something with the extra shot of adrenaline that comes from potent power under the hood. As his son Matt’s interest in cars grew, Long decided a project that involved both father and son would be just the ticket.
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design

HEMI WITH AN ACCENT
We know little about European drag racing, other than our sources tell us it is hotly contested and very popular. Frenchman Herve Caen is a drag racer, and at age 35, is the owner of not one but two silver ’68 ‘Cudas. One is a nitrous-equipped 440 Wedge built by

BAD BOWTIE
Some guys love their Chevys so much that they’ll go out of their way to flush out and record every bit of their cars’ histories. Such is the case with Gene Lavine of Excelsior Springs, Missouri. Lavine is 65 going on 35. A car guy since he was 16, he

FURIOUS PLYMOUTH
Mike Buzzello has always liked Chryslers and once owned a tubbed Plymouth Road Runner. He lives in Omaha, Nebraska, and attends rod runs and car shows regularly with his friend Steve Gantz. One year at a Goodguys show, Buzzello saw an interesting car drive by, but he couldn’t identify it.

Inside the Hottest Booths at SEMA 2025
The SEMA Show stands alone as the ultimate proving ground for the automotive aftermarket world. No other event brings this level of innovation, craftsmanship, and straight-up creativity together in one place. Everywhere you turn, there’s something new—fresh tech, wild ideas, and custom builds that push boundaries in ways only SEMA

SUBTLE CONVERSION
If you’re searching a crowd, you’ve got to look hard, and still you might miss the builder of this astounding yet subtle Corvette. It’s almost as if the man and his cars are one and the same—loaded with talent, with their most impressive aspects available only to those who take

CHEVY TRUCK ID: 1934-1972
Most of our truck-building buddies can date and identify any truck you can come up with from any distance, even from deep in a grove of trees and clear across a fairground show-’n’-shine. That’s what truck guys do: They enjoy identifying a rusted old fender at a swap meet…

The Hottest Trucks We Spotted at SEMA 2025
If there’s one thing SEMA delivers every year, it’s jaw-dropping builds—and the hottest trucks at SEMA 2025 didn’t disappoint. From slammed classics to high-flying off-road monsters, each build brought massive personality, insane attention to detail, and a presence that made the show floor buzz. These weren’t just trucks—they were rolling

Pyramid Optimized Design: The Builder’s Secret Weapon
When a build needs to go from “cool idea” to “everyone’s talking about this,” the pros call Pyramid Optimized Design. They’re the team behind some of the most talked-about show cars on the planet — using custom automotive design services to transform raw ideas into fully engineered, show-winning, road-ready components.

Our SEMA 2025 Hot List
SEMA always delivers sensory overload — the unveilings, the crowds, the horsepower echoing off every hall. But this year, the real thrill came from the unexpected. Tucked between the headline builds and mega displays were the parts that made us slow down, lean in, and say, “Okay… now that’s something

Metal, Muscle & Mastery: Inside SEMA’s Battle of the Builders 2025
Every November, the SEMA Show turns Las Vegas into the beating heart of the custom car world—but one showdown always steals the spotlight: the Battle of the Builders 2025. It’s the aftermarket industry’s ultimate test of skill, creativity, and innovation—where the best in the business fight for glory and the
THE AUTO BUILDER
Featured

Dalton Boydster

Driven Racing Oil’s Break-In Oil Kit BR30 5W-30

VIDEO MADE EASY!

The Crown Jewels: Meet the Top 6 Winners of the 2025 Triple Crown of Rodding
When it comes to prestige in the custom car and truck world, nothing shines brighter than the Triple Crown of Rodding. With over 50 state-of-the-art billet-machined aluminum and show-chrome-plated trophies on the line, the competition is fierce. But at the top of the heap are six elite titles—the ones every builder dreams about, the ones that truly define “best of the best.”


MUSCLE PERFORMANCE ’69 CAMARO
we learned that three important players in the hot rod industry—Chip Foose, Unique Performance and Year One—were coming together for a unique collaboration. Their combined goal was to build a limited-production-built car. Unique Performance already has just such a business, as it builds and sells its continuation Shelby Mustangs.
Spotlighter
POPULAR READS
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
-
PRODUCT SPOTLIGHT: Cam Covers for GEN/3 Coyote from Pyramid Optimized Design

HEMI WITH AN ACCENT
We know little about European drag racing, other than our sources tell us it is hotly contested and very popular. Frenchman Herve Caen is a drag racer, and at age 35, is the owner of not one but two silver ’68 ‘Cudas. One is a nitrous-equipped 440 Wedge built by

BAD BOWTIE
Some guys love their Chevys so much that they’ll go out of their way to flush out and record every bit of their cars’ histories. Such is the case with Gene Lavine of Excelsior Springs, Missouri. Lavine is 65 going on 35. A car guy since he was 16, he

FURIOUS PLYMOUTH
Mike Buzzello has always liked Chryslers and once owned a tubbed Plymouth Road Runner. He lives in Omaha, Nebraska, and attends rod runs and car shows regularly with his friend Steve Gantz. One year at a Goodguys show, Buzzello saw an interesting car drive by, but he couldn’t identify it.

Inside the Hottest Booths at SEMA 2025
The SEMA Show stands alone as the ultimate proving ground for the automotive aftermarket world. No other event brings this level of innovation, craftsmanship, and straight-up creativity together in one place. Everywhere you turn, there’s something new—fresh tech, wild ideas, and custom builds that push boundaries in ways only SEMA

SUBTLE CONVERSION
If you’re searching a crowd, you’ve got to look hard, and still you might miss the builder of this astounding yet subtle Corvette. It’s almost as if the man and his cars are one and the same—loaded with talent, with their most impressive aspects available only to those who take

CHEVY TRUCK ID: 1934-1972
Most of our truck-building buddies can date and identify any truck you can come up with from any distance, even from deep in a grove of trees and clear across a fairground show-’n’-shine. That’s what truck guys do: They enjoy identifying a rusted old fender at a swap meet…

The Hottest Trucks We Spotted at SEMA 2025
If there’s one thing SEMA delivers every year, it’s jaw-dropping builds—and the hottest trucks at SEMA 2025 didn’t disappoint. From slammed classics to high-flying off-road monsters, each build brought massive personality, insane attention to detail, and a presence that made the show floor buzz. These weren’t just trucks—they were rolling

Pyramid Optimized Design: The Builder’s Secret Weapon
When a build needs to go from “cool idea” to “everyone’s talking about this,” the pros call Pyramid Optimized Design. They’re the team behind some of the most talked-about show cars on the planet — using custom automotive design services to transform raw ideas into fully engineered, show-winning, road-ready components.

Our SEMA 2025 Hot List
SEMA always delivers sensory overload — the unveilings, the crowds, the horsepower echoing off every hall. But this year, the real thrill came from the unexpected. Tucked between the headline builds and mega displays were the parts that made us slow down, lean in, and say, “Okay… now that’s something

Metal, Muscle & Mastery: Inside SEMA’s Battle of the Builders 2025
Every November, the SEMA Show turns Las Vegas into the beating heart of the custom car world—but one showdown always steals the spotlight: the Battle of the Builders 2025. It’s the aftermarket industry’s ultimate test of skill, creativity, and innovation—where the best in the business fight for glory and the










