METALFLAKE: The Roth Way
November 8, 2024
THE AUTO BUILDER
Featured
TRUCK OF THE YEAR
While attending the Goodguys Nashville Nationals, we happened upon this stunning Studebaker. Its owner, Jeff Wingo, informed us that during his high school years this same Studebaker served as his daily driver, providing him a ride to and from school and around town. Now a fast-paced computer consultant, Wingo travels around the world, which has allowed him a better lifestyle compared to his teen years. He also has two young sons, Grant and Jack, who love their dad’s cool truck. Let’s rewind to the summer of 2000, when Wingo made the decision to resurrect the tired and worn pickup.
TPI: TODAY’S PERFORMANCE INCREASE
There are few modifications that can be made to an engine that can give both increased performance and better fuel economy. In these days of increased gasoline prices (nearly $4.50 per gallon), fuel mileage is an important consideration for vintage trucks that owners consider their daily drivers. For many reasons, vintage pickups are becoming not just weekend toys but also weekday workers. And one of the best ways to increase both performance and mileage is with an electronic fuel-injection system.
PRODUCT SPOTLIGHT: BTR’s Red Hot Camshaft
Alright, let’s talk camshafts—and not just any camshaft, but the BTR Red Hot Cam from Brian Tooley Racing. If you’re looking to unlock some real grunt from your LS engine and make it scream like it’s ready to tear the asphalt in half, this thing is the hot ticket. No fluff, no filler—this cam delivers straight-up power, attitude, and everything you love about LS engines dialed up to 11.
Spotlighter
TEST AND TUNE
December 10, 2024
No Comments
A stroll through the pits at the local 1/8-mile dragstrip is always fun for us, as you’re likely to see any number of cars that use a full-tube chassis, fiberglass body and monstrous slicks to click off consistent 5-second elapsed 1/8-mile times. However, it’s far more entertaining to see a stock-appearing car hit those same numbers, and that’s exactly what Greg Corbin’s ’98 Trans Am is capable of doing.
Rad Revolution
February 12, 2024
No Comments
Crafted with precision and expertise, this cutting-edge column is set to revolutionize your driving experience. Rad Rides engineers focused on maximizing space, ensuring comfort during entry and exit, and offering customizable steering wheel positioning. Compact yet powerful, the Tilt Steering Column boasts a total unit length of just 5 1/8 inches. With five different tilt positions and approximately 40 degrees of total tilt, you’ll find the perfect angle for your comfort and convenience.
WHATZIT?
January 8, 2026
No Comments
Our first thought was to try to figure out which make and model the custom started out as. Generally, there are enough clues that can enable you to determine the origin of a custom. This one, though, was so radically modified, yet nicely done, that it was particularly difficult to pinpoint exactly what vehicle the customizer started with. The custom had all the right proportions, and it flowed gracefully from front to rear.
SMOKIN’
July 16, 2023
No Comments
Allen Cornelius wanted to make a statement that his shop, AC Customs in Shreve, Ohio, could blend old-school Ford muscle-car performance with a new style truck, giving it the performance and looks to match.
LITTLE DEUCE COUPE
January 9, 2026
No Comments
LEGENDARY. For something to become a true legend (which actually may be a contradiction in terms), it must survive a certain amount of time. Our Funk & Wagnalls tells us this: “Legend (lej’end) n. 1. An unauthenticated story from earlier times, preserved by tradition and popularly thought to be historical. 2. A body or accumulation of such stories as those connected with a people or culture.” Under these guidelines, the famous blue coupe on these pages is legendary by definition. The fact that it survives today perpetuates the legend.
SQUIRT GUN
December 13, 2022
No Comments
You have to admit that the thought of injecting water into your engine sounds crazy. We all know that water doesn’t burn and it can’t be compressed. Those unfortunate souls who have tried to do this now have engines that are the equivalent of ship anchors. In this installation, we aren’t going to be injecting huge amounts of water into an engine, but rather a fine mist that’s proportionate to the fuel flow (10 percent to 20 percent), using a high-pressure pump. This will help lower the chances of detonation by reducing the intake charge temperature.
Sweet Patina
October 2, 2024
No Comments
We recently had the opportunity to work on a Levi’s Edition AMC Jeep Renegade—a unique piece of off-road history that has undoubtedly seen its fair share of adventures. The exterior still boasts its original paint, complete with bumps, scrapes, and surface rust that showcase the character that comes with many years of use and enjoyment. Rather than opting for a fresh new repaint, our mission was to preserve its tough, battle-worn patina while adding protection and a nice polished matte finish to show it some love. We wanted to enhance its character, highlighting its scars instead of hiding them, and, with the assistance of Sweet Patina’s products, we accomplished this beautifully. This Jeep didn’t spend its life tucked away in a garage; its paint tells a story, with each scratch, chip, and faded patch serving as a badge of honor. We felt that applying a shiny new paint job would be a disservice to this classic Renegade.
BOMB’S AWAY
November 7, 2024
No Comments
Bully Dog Technologies, located in Aberdeen, Idaho, was established in 1999 with the intent of designing and building diesel performance parts that both improved performance and truck reliability. In the past eight years, Bully Dog has hit its target and never looked back in the diesel world, and now has expanded its business with the same quality parts for both cars and trucks.
ALL BUSINESS BUICK
July 16, 2024
No Comments
Keith Samrany was poking around at a swap meet about 25 miles from his home in Grand Island, New York, when he found a ’35 Buick Series 40 business coupe that was just begging for a new owner. The coupe was in remarkably good condition, having been driven until around 1985, when a previous owner began a restoration that was never finished. Samrany, owner of KS Auto Stores in North Tonawanda, New York, had been a car guy for years, so he was very knowledgeable about the myriad of parts needed to build a hot rod. Enlisting the help of Dave Klock and Mark Morer, Samrany started to work on a project that eventually would take eight years to complete.
DEFYING NATURE
August 14, 2024
No Comments
Traditional hot rods are all the rage, and while it’s a great experience to run across a true barn-find hot rod, some folks would rather make their own with the perfect blend of colors, textures and just the right amount of sanding. It’s definitely a way to grab attention, as these so-called beaters steal the show from some of the finest rods around, but there’s no doubt lots of time and money is spent to obtain this look.
Bland to BAM!
October 17, 2024
No Comments
In early 2005, a funny thing happened to David “Stroke Daddy” Taylor from Ewa Beach, Hawaii. One morning, Taylor went out to buy a new pair of work shoes. He returned home, however, driving a brand-new ’05 Ford Mustang instead. we’ll let Him tell the rest of the story.
FREDDIE’S ’55
March 28, 2025
No Comments
Once a West Coast gasser, this ’55 Chevy made its way to Lebanon, Ohio, thanks to longtime Chevy enthusiast Freddie Green. That was back in 1978, when his son Jason was just four years old. Fast forward a few years, and Jason, professing to be a Chevy man since birth, took ownership of the car from his father at the age of 10.
