TheAutoBuilder.com

Trucks

CIMTEX SUPER CAMEO: PART 5

When we selected a Chevrolet Corvette ZR1 twin-cam, small-block 350 V-8 engine for our Cimtex Rods Super Cameo, we knew that we would be breaking new ground in the sense that GM never built a “production” automatic-transmission-equipped Corvette ZR1. However, there is record that a couple of Corvette ZR1s were specially equipped with automatic electronic overdrive transmissions for physically challenged Corvette enthusiasts. We don’t know whether it was done by the factory or by the private sector.

Nonetheless, it was our intent to run an automatic transmission behind this awesome powerplant. After all, we wanted our ’56 Super Cameo to be as civilized as possible, yet still be able to handle all the available torque and horsepower that will be the result of this twin Powerdyne (BD11-A) supercharged and intercooled Corvette ZR1 engine. But what type of GM automatic transmission would we actually be using?

0Comments

PACKED WITH POTENTIAL

The Power Programmer is designed so that once the parameters are established and loaded, the unit is pulled and the program remains in the onboard computer until you elect to remove it. The HyperPAC is different; this unit stays in place. In addition to the three stages of performance tuning—the HyperPAC has all of the performance programming benefits of the Power Programmer—it also has diagnostics; an engine monitor with a complete gauge display; a dynamometer, which includes such items such as a horsepower graph; and our favorite, a dragstrip program. This program actually monitors real-time engine operating conditions, has a Christmas tree start, displays a timeslip and will provide you with “magazine-type road test” acceleration times in 10-mile increments. It will record and display important engine operating conditions throughout the run and will display drive wheel horsepower versus vehicle speed after each run—in both table and graph formats.

0Comments

ON THE LEVEL

The ’07 Tahoe, Chevrolet’s premature baby, hit the street in late March 2006. Introducing the next generation of Tahoes so early was part of some master marketing scheme, born and nurtured in the hallowed halls of Chevrolet corporate. In any case, the ’07 Tahoe’s rear ride height measured 23-1/8 inches from the center of the hub to the lip of the fenderwell, while the front measured only 20-1/4 inches. As usual, the rear stood considerably higher than the front.

0Comments

MORE IS BETTER

Delve into the power principle of better breathing in engines, focusing on the intake side and how Airaid’s intake system improves airflow to increase rear wheel horsepower by up to 18 in late-model GM trucks.

0Comments

FUELING THE FIRE

Bully Dog Technologies, located in Aberdeen, Idaho, designs and develops some great bolt-on power products for the diesel aftermarket. Creating these pieces involves literally hundreds of hours in R&D and design work with some of the brightest engineers and technicians around. But, as you can imagine, it’s fun work.

0Comments

The HEAR & NOW

Delve into the world of classic truck customization as we guide you through the installation of a Custom Autosound USA-5 unit into a 1972 Chevy C10. Learn how to seamlessly integrate modern sound technology into your vintage ride without altering its original aesthetics.

0Comments

Remembering When

When Ricardo Lopez began building this 1955 Chevy he had some help, as well as a plan. In the beginning, this little Chevy pickup was to provide an excellent chance for Ricardo to spend some time with his son, Ricky, and to be able to show the boy some of the tricks that he had learned over the many years he had worked as a customizer, bodyman and painter. As owner of Paint By Lopez in Compton, California, Ricardo had hopes of his boy taking over for him in the years to come, maybe even calling the shop Paint By Lopez & Son. Unfortunately, Ricky was taken from Ricardo and his wife, Monica, in a freak accident. At first Ricardo was going to sell the truck, as the sight of it was almost too much to bear. But upon reflection he changed his mind. Ricardo thought that finishing the project was not only a perfect way to work through his grief, but it would also give him a chance to feel connected to the son he had lost. When the Chevy was completed, it would be a way to honor Ricky’s memory.

0Comments

For-ward Thinking

Those who know Ottawa, Kansas Roger Ward are almost certainly aware of his dry wit, his candid demeanor and his unique ability to create understated cars, one after the other. His talent in applying the most understated details to relatively unsung vehicles provides a lesson for us all that the best way to make a strong statement is to say as little as possible and do it your own way.

While his daily duties revolved around reworked body panels and refining those efforts with a paint gun, his lifelong hobby has focused those skills on a series of cars that exudes the same laid-back character which can be enjoyed in this extremely subtle, yet equally eye-?catching, 64 short-wheelbase Chevy pickup. As with so many trucks of this era, previous owners didn’t worry too much about retaining its pristine originality. Dented and rusty, this truck had been through the proverbial ringer, which made this conversion that much more difficult to achieve. Then again, Ward’s particular talents have made a great deal out of lesser vehicles, so this would simply be another test of his talents and another example of the skills he wields.

0Comments

’88 Blown GMC

In Hawaiian, “wiki wiki” can mean “hurry” or “fast,” depending on its use and interpretation.
New Zealand-born transplant Kim Greenwell’s Kahului, Maui-based black-on-black, 1988 GMC Sierra 1500 is definitely “wiki wiki” with its 500-plus-horsepower, Whipple-supercharged 383 small-block stroker. Greenwell’s basic intent was to build a stock-bodied hot rod pickup that he could use to advertise his automotive repair business, Kiwi Car Care. “I was looking for a nice, straight, rust-free truck that I could paint black,” says the Kahului automotive repair shop owner. “This truck was perfect. It was low mileage, and the price was right. But the brown color definitely had to go!” That’s not the only thing that got changed. “I kept the outside of the truck as stock as possible, but under the hood it’s a true sleeper.”

0Comments
Scroll to Top
image

Subscribe for Email Updates

Newsletter Categories *
Marketing by