Jerry Starling is a rod and custom car builder by trade, but like many builders, Starling found that he did not have the time available to build his own vehicle. When it did come time to build the fine-looking ’96 Chevy Tahoe you see here, he instead turned to the father-and-son team of Randy and Kevin Cox, and their shop Custom Concepts in Oklahoma City, Oklahoma.
Virginia Beach, Virginia, residents Ronnie and Linda Loyd have always held a special place in their hearts for classic trucks. Having owned several old trucks through the years, Loyd built a certain appreciation for early Chevy pickups, especially those of the 1967 thru 1972 era. Since Loyd already owns a ’33 Ford coupe and a ’93 454 Chevrolet SS pickup, he decided now would be the perfect time to complete his collection by getting the early ’70s truck he always wanted.
For the past several months Super Duty Headquarters in Gilbert, Arizona, has been working one very special project—a full-custom, double-throw-down pre-runner for non-other than Jesse James. Yes, that Jesse James.
Serious off-roading is rough on equipment. Only the toughest gear will stand up to the hardcore bashing and thrashing of rockcrawling, mudding and desert running. Even the toughest equipment, however will not last forever under these conditions. Once a part or component has been hammered on enough times, it must be replaced. Fortunately, with the rapid evolution of off-road engineering, the replacement is often much stronger and will withstand more abuse. In the case of the 1985 Toyota 4-runner in our story, we are replacing it’s fourth front bumper. Yeah, this rig has seen some serious trails from Moab to the Rubicon over the past ten years.
There is nothing more aggravating than having a dead battery, and it always occurs at the least opportune times. Our street rods are often stored or sit for periods of time. How many times have you decided the weather was perfect for an afternoon cruise and had a problem cranking the car?
Today’s 4x4s have become extremely specialized. At one end of the spectrum are one-off, purpose-built, non-street-legal rock buggies. These are the cream of the rock crop. Most have tube chassis with what seems like nearly 360 degrees of axle articulation. Often the transfer cases are doubled up to produce crawl ratios way beyond the once magical 100:1. They’re obviously awesome, and capable of handling boulders as if they were speed bumps.
While early Toyota trucks are a great foundation, they do require a few modifications to make them capable of serious off-road use. Sure, you’ll need the basics, such as larger tires, lower gears and some kind of traction-aiding device in the differentials, but first there is a more important issue at hand. The steering on these early Toyota trucks was not designed with hardcore off-road use in mind.
Poison Spyder has a reputation for building some of the most extreme crawler rigs out there, and when it comes to advice, Clifton is usually at the top of our list of guys to ask. We were looking for a bumper that would be able to hold up to any rock we could slide into, as well as a well placed winch mount. A good looking bumper would be an added bonus, but we were willing to compromise on that last option. As it turned out, Poison Spyder had recently released their Brawler Bumper for XJ Cherokee’s. Not only did it have everything we were looking for, it’s a lot easier on the eyes than you would think for a hardcore bumper.
Let’s face it, most of us are working within the confines of a set of unwritten, yet clearly defined, rules of hot rodding. Stance, engine choice and wheels are for the most part selected from a menu of items that come “pre-approved” by our peers. Sure these rules work most of the time, and they provide a degree of certain acceptance when you’re building a traditional pre-’49 hot rod. But all in all, it also makes us a group of conforming nonconformists. However, for some hot rodders (and they are in the minority) building hot rods is about pure ingenuity, a total lack of peer pressure and joy of mixing parts from various sources and making it all work.
Ford fans will always have a soft spot in their blue-oval hearts for the Windsor, the Cleveland and the big 460 FE engines—and deservedly so. If you’ve ever crawled a junkyard for one of these engines, you’ve likely passed over more than a few 351M and 400 engines to find what you are looking for. Poor factory numbers and bad word-of-mouth have made these cousins to the mighty Cleveland about as wanted as poison ivy at a nudist colony, but there is power to be found in those engines—and cheap, too.
![Women’s Em[POWER]ment Summit Builds Momentum in Its Second Year at HPX 2026](https://theautobuilder.com/wp-content/uploads/IMG_3631A_LEAD-300x300.webp)