Dive into the world of header fabrication as we demystify the process and equip you with the knowledge and skills to create custom headers for your vehicle. Follow along step-by-step as we break down the intimidating task into manageable steps, offering valuable insights and practical advice along the way.
This engine, and others like it, has opened up a brand-new chapter in the ever-evolving, wild world of Chevrolet power. By design it has a bore and stroke of 4.60 inches by 4.25 inches and Big Chief II heads, which are about 2 inches taller, that feature oval-shaped intake ports. This, they say, is for maximum cylinder filling. Years ago, creative racers would angle-mill heads to arrive at the desired combustion chamber size and to improve the valve angle in combination with the incoming intake flow. These heads are nicknamed “11-degree” heads, as they have been designed with a built-in 11-degree angle right out of the box. There’s no angle milling needed here. A special valvetrain is necessary, along with longer stem valves. Quarter Mile Performance feels that these heads are worth 200 additional horsepower over the very best “shorter” heads.
In past stories we have shown you how to shave door handles, install custom outside door handles, round door corners, build suicide doors, add bear claw latches and so on. Now we’re going to offer you a personal favorite custom touch—installing a dash from a ’59-’60 Chevrolet Impala into a ’56 Ford F-100.
Gone are the days of struggling to find restoration chemicals and parts. The article highlights how the availability of reproduction parts and user-friendly chemical solutions has revolutionized car restoration. It introduces popular and effective chemicals like 3M Underseal Undercoating, Eastwood Self-Etching Primer, and OEM Paints React, highlighting their benefits and applications. It even delves into restoring cast-iron parts, suggesting solutions like OEM Paints’ Steering Gear Box Finish. Get ready to be amazed by the latest advancements in car restoration!
When this ʼ54 Chevy truckʼs owner started building it, he wanted it to be fast and to have a nasty appearance. He always liked the Pro Street style, so that is the direction he decided to follow. He started by ordering a custom back half that was narrowed and set up with a narrowed rear differential with coilover shocks, a Panhard bar and ladder bars. In order to complete the back half, the car was delivered to Dream Cars, where the suspension was installed.
In Part III of our Cimtex Super Cameo buildup, we’re going to follow along as the guys from the Jarrell, Texas, crew modify the rear framerails on this ’56, “kicking it up” a full 8 inches. In the process, Tim and Darrell will also narrow the Corvette C4 IRS half shafts to achieve the much desired rear tire clearance they need in order to be able to run a set of humongous 20×10 billet wheels wrapped with a set of BFGoodrich radial T/A rubber.
“Building a good truck chassis is just like building the foundation for a house,” says Cimtex Rods’ Tim Cimbanin. “Everything starts at the ground floor. If you don’t have a good foundation, you don’t have anything!”
No truer words were ever spoken, and we’ve been preaching this fundamental information in all our publications.
While attending the 2003 SEMA Show, we ran across Darrel and Tim Cimbanin from Cimtex Rods in Jarrell, Texas. The Cimbanin brothers were there to drum up support and showed us some sketches of their latest truck building project, and what a project it is!
Competitors from across the country converged on Jellico, TN to compete in the Eastern US Nationals held by W.E. ROCK (World Extreme Rock Crawling Series). White Oak, a small community located just outside Jellico, TN is where the event was held. Lil’ Rich, course designer for W.E.ROCK stayed true to his reputation for designing some of the most technical obstacles in the rock crawling world, and Jellico was no exception.
Between 1984 and 2001, Daimler Chrysler built about two million eight hundred thousand Jeep Cherokees. They were built in several combinations—two and four door, two and four wheel drive and stick or automatic and with three different engines. The vehicle was not well received. In print they were tagged as being too long, too heavy, under powered, poor brakes , and worst of all—uni-body construction. Before every Tom, Dick and Mary had an SUV in the driveway, young families were getting to work, going to school and having weekend fun. Give credit to Jeep for introducing a lot of young people to off-roading thru the Cherokee line.
