Final Assembly Tips From The Pros
September 25, 2022
Edit Template
THE AUTO BUILDER
Featured
Curves, Chrome, and Legacy: Fat Attack 2026
February 17, 2026
AMERICAN RACING TORQ-THRUST
May 21, 2025
AIR SUPPLY
Air conditioning is a luxury that most early truckers agree they can’t be without, especially when they reside in a hot part of the country. But those big, clunky compressors, huge receivers hanging below the dash, bulky hoses running all over the place and extra wires showing are some of the reasons why air conditioning has deterred hardcore rodders for years. Of course, Vintage Air has eliminated those concerns with an excellent add-on system that not only works well, but also coexists with your engine compartment and interior aesthetics.
Vintage Air has kits that are designed for specific applications as well as universal kits. Its kits provide all of the required mounting hardware, brackets, vents, hoses, fittings, ducting, electrical wiring and switches needed to get you through your project. If you have any problems, Vintage Air has a tech support line that is second to none. You have a choice of either the internet or telephone (weekdays only).
Keeping Your Cool
Even though we all dream of blasting through the desert at 130-MPH like Robby Gordon, most of our 4×4 adventures take place at a much more reasonable pace. Unfortunately for our engines crawling along a boulder strewn dry river bed or climbing a goat trail through a mountain pass does not always allow enough airflow to keep our engines cool with a belt driven mechanical fan. Belt driven fans are designed to keep your engine cool when traveling down a street or highway not while crushing boulders at 3-MPH and 1,500-RPM. So what can we do to keep our rigs from boiling over this summer? Follow along with us as we install a pair of 11-inch electronic cooling fans along with a programmable fan controller both from SPAL USA.
GTD Speedster
While Ferrari, Corvette and other historic vehicles may come to mind upon seeing these bodylines, the GDT Speedster stands alone as a prime example of advanced engineering, creativity and, most of all, individuality. Constructed of fiberglass over a steel frame/chassis structure, the fit and finish is as good as it gets, as it shows the real-world functionality of this one-of-a-kind machine.
Spotlighter
CHEVELLE MEMORIES
This ’65 Chevelle Has Been Redone and Looks Better Than the Day Dad Brought It Home From the Dealership
“If these four walls could only talk, what great stories they could tell” is an old adage that is certainly apropos from a historical perspective. In the context that we Americans have an ongoing love affair with the automobile, it could also be said that if a classic car could only talk, it could tell some pretty great stories as well!"
Author
Bob McClurg
Story and Photography
A Family Treasure: The Story Behind the ’65 Chevelle Malibu
If that were the case, Bow Tie enthusiast Joseph Andrew “Andy” Viduarri of Lakewood, Colorado, owns an ’04 Cadillac Crimson Red metallic-painted ’65 Chevelle Malibu that would speak in volumes. This car evokes many fond memories of happier, less complicated times. You see, the ’65 has been in the Viduarri family since it was brand-new, but we’ll let Andy tell the rest of the story.
A Lifetime of Memories
“My father purchased this car brand-new from Hajek Chevrolet, located in Longmont, Colorado. The Chevelle was originally powered by a 283/2-bbl and Powerglide transmission. I have a lot of fond memories with that car. I rode to school in it, I got my driver’s license with it, and I even dated in it,” he says.
Transformation into a Street Machine
In 1986, Andy inherited his father’s prized possession but didn’t do anything with it until 1998. “It was then that I slowly started transforming it into the awesome street machine it has since become,” he says.
Suspension and Braking Upgrades
Completed on April 4, 2007, Andy’s Chevelle features Eibach muscle car front springs, a later-model Chevelle 1-1/4-inch front anti-sway bar, Master Power front disc brakes, and KYB gas-charged front shocks. Out back, the ’65 features a Ford Explorer disc brake-equipped, 3.70:1-geared Currie 9+ live rear axle with Eibach muscle car rear springs and KYB gas-charged shocks.
Wheels and Tires
Wheels and tires come in the form of a set of briefly produced 15×7.5-inch Edelbrock five-spoke aluminum wheels rolling on P225/60xZR15 front and P275/60×15 rear Yokohama high-performance radial rubber.
The Engine: A ZZ4 Small-Block Beast
Sitting inside a fully detailed and wireless engine compartment is a 2004 vintage, 10:1-compression, GM Performance Parts ZZ4 350cid small-block crate engine featuring a ZZ4 single-plane cast aluminum 4-bbl intake manifold with a 1-inch carburetor plate and K&N-filtered 600cfm Holley carburetor. The HEI ignition system fires everything up while Hedman headers and Flowmaster 40 mufflers handle the exhaust. Also on board are a set of Tru-Trac billet aluminum engine pulleys and a Power Master billet aluminum 100-amp alternator. Backing all this up are a Hurst-assisted Muncie M21 close-ratio four-speed transmission and Centerforce II clutch.
Custom Body and Paint
Andy also performed all of the paint and bodywork on the ’65 right at home in his garage. The Chevelle features shaved door handles and pop locks. The extruded aluminum grille insert has been painted black, and the car is also equipped with a set of Snake Eyes halogen headlights.
A Lavish Interior
Inside, Denver’s Auto Weave Upholstery lavished the interior and trunk in tan soft leather with matching tan wool carpeting. The revitalized Chevelle also makes use of an Auto Meter-equipped Covan’s Classic dash, GM six-way-tilt steering column with late-model Camaro steering wheel attached, A/C, and tinted glass.
A Beauty on the Streets of Denver
Completed at a cost of $60,000 over a three-year time period, Andy’s Chevelle gets driven to all the local cruise nights around the Greater Denver area. It garners attention wherever it goes, which is no big surprise. This car is a real beauty.
