Product Spotlight: BTR Godzilla Truck Norris Camshaft
October 29, 2026
Edit Template
THE AUTO BUILDER
Featured
Interior Design
When Jorge Torres was young he would help his father around his shop. Named after the senior Torres, Armando’s Custom Upholstery in San Jacinto, California, opened in 1989 when Jorge was still in high school. In 1992, he began working full time with his father and brother, Armando Jr. He stared doing old cars and went to a few shows to promote their work. During this time he mentioned to his dad that he wanted to build a 1969 Chevy pickup. It turned out that his dad had a friend who owned one, but he was told that the truck was in pretty rough shape. All Jorge heard was that the price, at $1,500, was in his range.
Not A Mini Makeover
Pawl Shanley’s 1985 Dodge D350 dually isn’t your average pickup. This British truck has been transformed into a show-stopping masterpiece with an air suspension that lets it kneel at the pavement, a BMW Montreal Blue paint job with intricate marbleizing, and a custom interior by Aerotrim, a company that usually specializes in aircraft. Despite the challenges of modifying such a large vehicle, Shanley’s vision has resulted in a truly unique and impressive truck that stands out even in a country known for its Minis.
Smooth Trails Ahead: Installing Skyjacker’s Slip Yoke Eliminator Kit for Your Jeep Wrangler TJ
Upgrading your Jeep for better off-road adventures sounds awesome, but sometimes it can cause unexpected problems. For example, when you install a Skyjacker Rock Ready-Double Flex Suspension Kit, you might notice your Jeep vibrating more than usual. That’s because the lift can mess with how the transfer case and rear axle line up. Luckily, Skyjacker has a solution called the Slip Yoke Eliminator (SYE) kit. It not only stops the vibrations but also makes your Jeep’s drive shaft stronger. In this guide, we’ll walk you through installing the NP 231 Short Shaft “Fixed Yoke” Kit. We’ll cover everything from the tools you need to important things to think about before you start. So, if you’re eager to boost your Jeep’s performance, keep reading to learn how Skyjacker can help.
Spotlighter
MASH THE GAS (CA REFULLY)
This Little Jeep Takes Asphalt By Storm
Few vehicles have done more work or driven more rugged miles than the basic military Jeep. These vehicles covered the globe during World War II, and virtually every soldier since that time has ridden in the utilitarian Jeep. Thousands were built and many were destroyed, left behind or later scrapped, so today a World War II Jeep is something to treasure.
Author
Gerry Burger
Photography by F. Scott Grant
The Inspiration Behind the Restoration
The story behind Larry Way’s ’46 Jeep actually began many years ago when a young Bob Johnson used to hear his father say that one day he’d like to restore a World War II Jeep. As the years passed, both Johnsons became avid street rodders, and so the restoration of a Jeep seemed to fade into the background. Then, just a few years ago, the urge resurfaced for some military iron in the garage, so the Johnsons, father Ben and son Bob, decided to locate and restore a Jeep.
A Powerful Transformation
Well, by now the street rodding blood was running so true that even before they found a Jeep they decided they would need to find the smallest series Jeep built, and then, just for fun, stuff the biggest engine they could find under the boxy hood. To that end they secured one rather large engine. How large? Well, how about a 500ci Cadillac engine? For those of you who are metric minded, that works out to 8.2 liters. That should be large enough to motor-vate, say, a ’46 1/2-ton Jeep, don’t you think?
Of course, a stock 500-incher would have done the job just fine, but as we mentioned, the street rod fever was running strong in the Johnson garage, so the engine was brought to West Carlton Automotive, where a custom-grind camshaft was slipped into place. While they were in there, it seemed as if a set of Keith Black pistons would be a big improvement, and of course porting those big heads lets ample air and gas into the huge holes under the head. An Edelbrock intake and Holley carb feed the hungry Caddy, and Edelbrock chrome valve covers add a little flash. Behind the engine, a built Turbo 400 tranny spins a 2,800-rpm-stall torque converter.
Custom Frame and Suspension
After they located a ’46 1/2-ton Jeep, it was hauled back to the Johnson shop (Johnson Welding Works in Ottawa, Ontario, Canada) for “a little work.” Now, the work performed at the Johnson shop is a bit better and a whole lot wilder than what the Jeep was used to receiving down at the motor pool. To begin with, an entire new frame was fabricated from 2×4-inch box tubing. The frame was designed to widen the body 6 inches and lengthen it 10 inches. The front suspension is hand-formed independent by the Johnson shop with a Mustang II rack-and-pinion providing the steering. Out back, a 9-inch Ford rear was narrowed and filled with Strange axles. Four-wheel disc brakes stop the little Jeep with military precision. Rolling stock for the Jeep comes in the form of 14×4 steelies up front with “square” 15×15 wheels out back. Yes, they are as wide as they are round. Mickey Thompson Sportsman 29×18.5×15 rubber harness the luxurious and abundant Cadillac power, while Firestone 185/65R-14 tires turn the Jeep around. Every inch of the chassis was detailed to perfection, but before being painted, the ’46 Jeep body was mounted to the frame.
Custom Fabrication and Paint
It seems the only World War II parts to survive the “restoration” were the cowl, hood, grille and tailgate. Everything else was custom fabricated. In the process the body was widened 6 inches and lengthened 10 inches. The windshield frame was custom built, and that Willys logo on the windshield was downloaded from the Internet; a die was formed and the old logo was stamped into the frame. The rear fenders are heavily modified CJ2 units, while the front fenders were fabricated in the Johnson shop. All panels were formed without the use of an English wheel, since Jeeps just aren’t very curvaceous.
When the body panels were fit and the metal was straight, several coats of green paint were applied. Now, anyone could have laid down a rust barrier of olive drab, but the Johnson boys went one better with an outrageous electric green from Chrysler called “Get ’Em Green.” The wheels were painted to match in true military tradition. After all, this is a “restoration.”
Interior and Final Touches
On the inside of the Jeep, a custom-fabricated bench seat holds two people, while a large chromeplated rollbar protects occupants from unexpected vehicle inversion. The steering column is from a Pontiac Sunbird and the tilt option is one they didn’t have during World War II. A B&M star shifter selects the gears in the Turbo 400 below. The custom-fabricated dashboard is steel with aluminum inserts and VDO gauges. Down on the floor we find diamond-plate steel floors covered with bed-liner material, and Lokar pedals add a touch of class. A waterproof (after all, this is a roadster in the truest sense of the word) Clarion marine stereo pumps the booming power to Bazooka marine speakers. All things electrical are operated by the American Autowire harness.
A Satisfying End Result
It took the Johnson boys about a year to get the old Jeep back in service, but when it hit the road, all the work was worthwhile. The Jeep is faster than a rocket launcher, pretty as a pinup and as reliable as a Cadillac. After a year or two on the road, Larry Way purchased the Jeep, and after detailing it a little and tidying it up, he continues to enjoy this very cool Jeep.
You know, it’s hard to tell how big the engine really is, but trust us—it’s a Jeep full when you transplant a huge Caddy engine under the hood.
The steel dashboard was custom fabricated. Then the VDO gauges were set in an aluminum insert. Note the interchangeable “hold on” and “shut up” signs. Wing nuts allow sign changes according to who is driving.
