
THE AUTO BUILDER
Featured

The Trucks of Detroit Autorama 2026
Every winter the custom car world makes a pilgrimage to the Motor City for one of the most legendary indoor shows on the planet: the Detroit Autorama. Held inside the massive Huntington Place, the 2026 edition once again packed the halls with hundreds of wild customs, Ridler contenders, hot rods, and trucks that refuse to blend into the background.

PRODUCT SPOTLIGHT: 6.5L Turbo-Master Wastegate Controller
More is always better, until it’s too much. The wastegate is responsible for keeping the turbo from continuously building boost until it pops. By allowing exhaust gas, the driving force of the turbocharger, to bypass the expeller (turbine), it will stop the impeller from sucking in air, creating boost.

SUBTLE AND SMOOTH
The path old hot rods travel is often an amazing one; some hot rods saw a world of change in their many years of service, while others remained hidden from the saws and torches, thus saving them from mutilation and lackluster workmanship. The ’34 Ford on these pages is one such example of a car that maintained its integrity through nearly three quarters of a century. Finding this jewel was a dream come true for John Cox, when he bought the coupe as a driver and realized it had lived an easier life than most, even though its original chassis had been modified.
Spotlighter
POPULAR READS
-
The Auto Builder’s Hottest Product Picks from The Triple Crown of Rodding 2026
-
Product Spotlight: Bill Mitchell Products Aluminum LS Engine Block
-
PRODUCT SPOTLIGHT: 60-66 Chevy C10 Fresh Air Vent Block Off Plate
-
Product Spotlight: Pyramid Optimized Design Sequential Aurora Taillight for 1964½–1966 Mustang
PRODUCT SPOTLIGHT: HEAVY-DUTY 6-BOLT LS IRON BLOCK by SMEDING PERFORMANCE
Serious Strength. Heavy-Duty Durability. A $2,995 Price That Means Business.
Author
The Auto Builder Staff
Photos courtesy of Smeding Performance
Big horsepower gets expensive fast. Between the rotating assembly, cylinder heads, valvetrain and power adder, an LS build can burn through a budget before the first bolt gets tightened. Your engine needs a strong foundation—but buying one shouldn’t derail the entire project.
Enter the Smeding Performance Heavy-Duty 6-Bolt LS Iron Block. At $2,995, it brings an aggressive price to the aftermarket LS arena, backed by construction engineered for demanding performance applications. This is where the horsepower plan meets the checkbook—and both get something to smile about.
MORE BLOCK FOR YOUR MONEY
Smeding builds its heavy-duty foundation from 220 BHN Class 35 gray cast iron, pairing it with billet steel main caps, four-bolt splayed retention and 7/16-inch, 150,000-psi fasteners.
Those are meaningful specifications, not cosmetic upgrades. According to Smeding, the combination delivers the rigidity and bottom-end stability needed for increased cylinder pressure and RPM.
Spend wisely underneath, and there’s more room in the budget for everything going on top.
CLAMP DOWN ON CYLINDER PRESSURE
The six-bolt cylinder-head configuration adds clamping capability to help maintain head-gasket integrity. Smeding positions the block for high-output naturally aspirated and boosted combinations.
Whether your build sheet calls for a hard-hitting naturally aspirated engine or a boost-fed bruiser, the foundation deserves as much attention as the headline horsepower number.
OILING WITH A PURPOSE
Smeding’s priority-main three-galley oiling system provides a dedicated circuit for the crankshaft and connecting rods. The company says this improves oil distribution and supports demanding high-RPM operation.
It’s engineering you won’t see once the engine is assembled—but exactly the kind you want working behind the scenes.
BUILD IT YOUR WAY
Specifications include a 4.120-inch rough bore, 4.185-inch maximum bore and 9.240-inch deck height. A thrust plate and block-plug kit are included; 1/2-inch head-bolt machining and ARP main studs are optional upgrades. Confirm finish-machining and preparation requirements with Smeding or your engine builder. Product details.
Specs at a Glance
Smeding Performance Heavy-Duty 6-Bolt LS Iron Block
- Price: $2,995
- Part Number: SP41259240LS
- Block Material: 220 BHN Class 35 gray cast iron
- Cylinder-Head Configuration: Six-bolt
- Main Caps: Billet steel, four-bolt splayed design
- Main-Cap Fasteners: 7/16-inch, rated at 150,000 psi
- Oiling System: Priority-main three-galley
- Rough Bore Diameter: 4.120 inches
- Maximum Bore Diameter: 4.185 inches
- Deck Height: 9.240 inches
- Cylinder Length: 5.750 inches
- Lifter Bore Diameter: 0.842 inch
- Included: Thrust plate and block-plug kit
- Optional Upgrades: 1/2-inch head-bolt machining and ARP main studs
STRENGTH WITHOUT THE STICKER SHOCK
The price deserves another look. At $2,995, Smeding undercuts higher-priced alternatives such as the Dart SHP LS Next Pro 31867112, advertised by a leading competitor at $4,699.99. Equipment and machining specifications differ—the Dart includes ARP main studs—but the lower starting price gives budget-conscious builders a compelling reason to consider Smeding.
That’s the appeal: heavy-duty engineering, an aggressive price and more breathing room for the rest of the build.
Build strength into the foundation. Keep horsepower in the budget. Explore the Heavy-Duty LS Iron Block at Smeding Performance.
ARTICLE SOURCES
Smeding Performance
Celebrating 34 years of business building high performance custom engines with a 3yr warranty!










