machine work
Thirty-five years and $636 ago, we bought an 80,000-mile ’62 fuel-injected Corvette in Fresno, California. Sadly, the car had been stolen once. The fuel injection was gone as well as the T-10 four-speed transmission. A pair of bare 461-X heads was in the trunk. The engine was found to have a rocking rear cam bearing, which caused oil to shut off to the rocker arms at high rpm. At the time, the prognosis was that it could not be fixed, so the motor was replaced with a ’68 350hp 327. Since 1976, the car has been in storage, along with the original engine.
You can drive this bad boy coast to coast and burn all the rubber you want in between.” That was Day Automotive’s Tony Shaffer proclaiming the abilities of his shop’s 482/409. Soon thereafter, we were entering the confines of Day Automotive in Independence, Missouri, where Shaffer and crew had just completed the engine in seven days. It represents what can be accomplished power-wise with the right combination of parts, plus some internal modifications. And with a 10.0:1-compression ratio, it’s very street-friendly.
